You are viewing an old version of this page. View the current version.
Compare with Current ·
View Page History
These instructions help you configure your LG IPLDK phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.
Connection Type
TIM Plus establishes a serial connection with this PBX.
Support Files
LG IPLDK.TDT
LG.TDS
Required Tasks
$paramRequiredTask1
Connection Type
TIM Plus establishes a TCP connection to this PBX.
Support Files
LG IPLDK.TDT
LG.TDS
Required Tasks
$paramRequiredTask1
Configuring your SMDR
These instructions should assist in configuring your LG IPLDK to work with TIM Plus. If you are not familiar with PBX configuration, please contact your system maintainer.
| Connection information | Description |
|---|---|
| Connection type | Serial Output or IP: If you have configured the LG IPLDK to send the SMDR information via a serial connection, you will need to directly connect a serial cable from the LG IPLDK to the PC that NetPBX is installed and running on. |
| Cable configuration | Null-modem/Crossover. |
| IP method | If the LG IPLDK is configured to send the SMDR information via TCP/IP, the actual installation of TIM Plus can be anywhere on the network that the PBX is connected to. The LG IPLDK will need to be configured to output SMDR data via TCP/IP so TIM Plus can connect to it. TIM Plus will connect to the LG iPECS on TCP port 23. |
Configuring your SMDR
The LG IPLDK by default has SMDR output disabled. Below you will find the programming number codes and the fields that need to be configured.
Print Serial Port Selection (PGM 175)
Within this window you need set Info/On-line SMDR to Telnet 1. This will allow TIM Plus to connect to the LG IPLDK on TCP port 23 to receive SMDR data.
Below is an example of the Print Serial Port Selection window:
SMDR Attributes (PGM 177)
Below is an example of the SMDR Attributes window:
ISDN Attributes (PGM 200)
Below is an example of the ISDN Attributes window. Please note that the CLI Print to serial field needs to be enabled.
Configuring TIM Plus
Below you will find steps on how to configure TIM Plus to listen for SMDR data from your LG IPLDK:
- Browse to TIM Plus as normal and login with your credentials.
- Click on the tab.
- Click on the site configured during the setup wizard and click or create a new site and click .
- Within the Site Properties window, select LG IPLDK from the PBX model drop-down list.
- In the Connection method field select Actively connect to PBX from the drop-down list.
- In the Host field enter the IP Address of your LG IPLDK.
- In the Port field enter in 23.
- Leave the Username and Password fields blank.
- In the Connection script field select Generic Simple from the drop-down list.
- Finally, click on the button.
