Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version. Compare with Current ·  View Page History

These instructions help you configure your BT Monarch to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Connection Type
  TIM Plus establishes a serial connection with this PBX.

Support Files
  BT Monarch.TDT
  BT Monarch.TDS
Required Tasks
  $paramRequiredTask1

Configuring your SMDR

The BT Monarch sends SMDR information via a serial connection. You will need to directly connect a serial cable from the AGFEO AC-AS phone system to a PC that will be running NetPBX software.

For more information about the output and configuration of the SMDR data, please contact your phone maintainer.

These instructions should assist in configuring your BT Monarch to work with TIM Plus. If you are not familiar with PBX configuration, please contact your system maintainer.

Connection information Description
Connection type Serial Output: As the BT Monarch sends SMDR information via a serial connection which is located on the BT Monarch unit itself, you will need to directly connect a serial cable from the BT Monarch to the PC that NetPBX is installed and running on.

For your SMDR configuration, you will need to speak to your system maintainer to enable SMDR output.

Configuring TIM Plus

Below you will find steps on how to configure TIM Plus to listen for SMDR data from your BT Monarch:

  1. Browse to TIM Plus as normal and login with your credentials.
  2. Click on the Directory tab.
  3. Click on the site configured during the setup wizard and click Propertiesor create a new site and click Properties.
  4. BT Monarch
  5. Within the Site Properties window, select BT Monarch from the PBX model drop-down list.
  6. In the Connection method field select No connection required from the drop-down list.
  7. Finally, click on the Save button.
Labels: