Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version. Compare with Current ·  View Page History

Introduction

Primarily for use in situations where you need to produce a telephone bill for a client or group of clients, for example in a business centre, a hospital, or other organisation with a front-of-house function. The result is a fully-fledged telephone bill - in the same style as one you'd expect to receive from a telephone company. See the section on customising reports for information about how change the complete look and feel of the bills you produce e.g. including your own logo at the top of the bill.

Phone bill

Marking up calls

The markup to calls is added at Directory level. This means that users can be given access to all reports, if required and see the marked up cost rather than the "real cost".

It also means the user does not have to remember to add a markup each time the report is run as it will automatically be added.

To add a markup to calls for any group, go to the Directory and select the group you would like to mark-up, then select Properties as shown below:

Phone bill

The following pop-up box will appear. Simply select the Charge tab and add the markup required as shown below. In the example below a 40% markup will automatically be added to all calls in this group.

Phone bill

Running the report

On the Reports screen, click on Phone bill in the reports list and then press the Select this report button.

Phone bill

The following report selection criteria window appears:

Reporting period

Every report requires a period to run over. This is generally defined as the "Reporting period".

Phone bill

There are several pre-defined periods that can be selected from a simple drop-down list as shown above.

The built-in periods are based on a standard Gregorian calendar and are defined as follows:

Period Description
Today The start date and end date is set to the current date. The default start time is set to 00:00:00 and the end time to the current time.
Yesterday The start date and end date is set to the current date minus one day. The start time is set to 00:00:00 and the end time to 23:59:59.
This week The start date is set to the Monday of the current week, whilst the end date is set to the current day. The default start time is set to 00:00:00 and the end time to the current time.
Last week The start date is set to the last Monday, whilst the end date is set to the start date plus seven days. The start time is set to 00:00:00 and the end time to 23:59:59.
This month The start date is set to the 1st day of the current month and the end date to today. The default start time is set to 00:00:00 and the end time to the current time.
Last month The start date for this period is set in three stages. The day is set to 01, the month is set to the current month minus one, or in the case of January, it is set to 12. The year is set to the current year, unless it is a new year, in which case the year is reduced by one. The start and end times are set to 00:00:00 and 23:59:59 respectively.
This year The start date is set to the first day of the first month of the current year. The end date is set to today's date. The start and end times are set to 00:00:00 and 23:59:59 respectively.
All calls The start date is set to the date of the first call in the database, whilst the end date is set to the date of the most recent call in the database. Times are also set to the times of the first and last calls in the database.
Custom period Enter the start and end dates and times into the boxes below. The start and end times are linked to their respective dates.

If you want to be more specific, you can choose the Custom period from the bottom of the drop-down list. This option will allow you to define the start date and end date yourself, as shown below. When you need to be even more specific, you can also choose a start time and end time.

Phone bill

When the report is executed, if the user has selected an in-built period, the reporting engine simply substitutes the start and end dates based on the current date and the period the user selected.

Once you have set the report's period, click on the Next button to set more of the report's features or select the Finish button to run the report.

What do you want to report on?

In addition to the reporting period, each report offers you the opportunity to define exactly what you want to report on. This is generally a site, group or user.

Site
Phone bill

TIM Plus will allow you to log information from up to five sites. If you want to report on a specific site, select that site from the drop-down list or to select all sites' data, leave it at the default All sites as shown above.

NOTE: The username and password you have been allocated may mean you are restricted to specific sites or groups. If you have any difficulty accessing other sites or group, please contact your system administrator and check that access has been enabled.
Group
Phone bill

There is no limit to the number of groups available on each site. Groups, like sites are available as a drop-down list. You can choose to select a specific group or leave at the default All groups. Please note that the drop-down list for each group can only appear if a site has already been selected.

User
Phone bill

Once a site and group has been selected, you can decide whether you would like to report on all users or select a particular user from the drop-down list as shown above.

Once you have set the report's entities, click on the Next button to set more of the report's features or select the Finish button to run the report.

Filter call information

Phone bill

You have the option of filtering the information, based on a number of call filters. These filters allow you to be very specific, when deciding the call information you would like in the final report.

If you do not want to select any filters, simply press the Next button to skip.

Please find a brief description of all filters below:

Account code

If you want to produce a bill consisting of all chargeable calls made using a particular account code, enter the account code in this filed. To report on more than one account code, simply comma separate.

Account code

Call type

This filter allows you to define the type of call you would like to report on. If you would like to report on all calls, leave at the default All calls.

Call type

Carrier

If you use more than one carrier, you can choose which carriers calls you would like to report on.

To report on all calls from all carriers, leave at default.

If you only use one carrier, there will be no drop-down list available and no option to choose a different carrier.

Carrier

CLI

The Caller Line Identification (CLI) is the number associated with the incoming call. This is sometimes withheld by the person making the call.

You may choose to report on calls from a particular CLI or from numbers beginning with a particular CLI by entering the number in here. For example, for calls from Tri-Line you would enter in "02072652600". This filter accepts the comparison operators ! and *, e.g. to exclude calls from Tri-Line use "!020726526*".

To report on more than one CLI, simply comma separate.

CLI

Cost

If you want to add a filter for call costs, simply type in the cost you wish to define as shown nearby and add the appropriate above, below and between symbol . This filter accepts range (-) and comparison operators (>, <, ! and *).

Cost

Destination

If you want to filter calls to a specific destination and that destination has been added to your locations field, simply type the destination in here. This filter accepts the comparison operators ! and *, e.g. to exclude all calls to France use "!France*".

Destination

Dialled number

To filter calls to a specific number, type the number in the dialled number field. To filter calls to a specific area, a partial number may be entered here e.g. "0033" for calls to France. This filter accepts the comparison operators ! and *, e.g. to exclude calls to 0207 265, enter "!0207265*".

Dialled number

Duration

To filter call above or below a particular duration, simply enter the number of seconds and the relevant symbol. This filter accepts range (-) and comparison operators (>, <, ! and *).

In the example nearby, the filter will look for calls above 1800 seconds (30 minutes). Alternatively you may want to exclude calls below a certain threshold e.g. below 3 seconds.

Duration

LCR code

If you are using Least Cost Routing (LCR), you may want to filter by LCR code in order to check a bill from your LCR provider. To do this simply enter the LCR code in the LCR field. This filter accepts the comparison operators ! and *, e.g. to exclude a specific LCR code, simply add as follows "!162*".

LCR code

Response

This filter allows you to filter based on the response times to calls. You have the option of filtering for calls above or below a threshold. You can define this threshold in the box alongside.

The figure relates to seconds. e.g. the example nearby shows 10 seconds. By selecting from the drop-down list, you will be able to filter calls that took more than 10 seconds to answer or see calls answered in less than 3 seconds.

Response

Start time

This filter allows you to filter calls based on the start time. This is the time of day when the call started in the format hh:mm:ss, e.g. if you want calls after 8 a.m. only, then enter the start time in as "08:00:00" as shown nearby.

Start time

Trunk access code

If you want to filter by Trunk access code, simply enter the Trunk access code in this field. This filter accepts the comparison operators ! and *. The * is not needed if it's an exact match, so the 9 for TAC should just be "!9", e.g. to exclude all calls with access code 9, add "!9" to the TAC field.

Trunk access code

Specific Options

Phone bill

This section allows you to add more specific filters to your report. The filters are fairly self-explanatory. If you would like to exclude weekend calls from the report, simply tick the option to exclude weekend calls.

Exclude weekends

This option gives you the option of excluding weekend calls from any results shown. If you would like to exclude weekend calls, simply select the tickbox to exclude weekend calls.

Phone bill
Exclude transfers

Select this option if you would like to exclude transfers when running a report. For example if you were running an incoming call analysis report and wanted to see only how well calls were answered when first presented, you would choose the option on excluding transfers.

Phone bill
Summary only

If you would like to provide a summary listing the total number of calls and the cost rather than a detailed list of individual calls made, tick the 'Summary only' option shown here.

Phone bill
Don't replace numbers with contact names

Tick this option if you do not want dialled numbers, CLIs and account codes replaces with their named equivalents, as they are defined in your web user's contacts list(s).

Phone bill
Hide unused

This option gives you the option of excluding unused extensions from the results shown. To exclude unused extension, simply select the tickbox, as shown below:

Phone bill
Hide charges

Charge information will not be applied to this report.

Phone bill
Sort order

Choose whether you would like the results of the report to appear in ascending or descending order, by selecting from the drop-down box.

Phone bill
Sort results by

You may choose the order in which results are sorted by selecting the appropriate option from the list shown below:

Phone bill

Creating the report

When you have chosen a reporting period, and are happy with your selections, you have two options:

  • Run the report now
  • Schedule for future delivery
Phone bill

To choose your preferred option, select the appropriate button.

If you choose to run the report now, click the Run now button. The results will appear immediately in your chosen format.

To schedule the report for delivery at a later date, follow the instruction given on the Schedule a report section.

Phone bill - The results

When selecting Web as the output format, this report will appear as below.

The Web format allows for complete flexibility when viewing any report. To view details of any filters or selection parameters used in creating this report, simply click on About this report at the top right of the page.

As with all reports, the header of the report includes the report title, any name you may have given to it, and the date and time it was run.

Phone bill

All headers are clickable allowing you re-arrange the report layout in seconds, to sort the calls in ascending or decending order based on the header clicked.

The headers of this report are as follows:

Header Description
Date & Time This column shows the date and time when the call was made.
Dialled number The telephone number that was dialled.
Destination This is the location name associated with the number dialled. Please note that any number can be customised with its own specific duration in the locations field of the Directory.
Duration The duration field shows the total time spent on the call in hh:mm:ss format.
Cost This is the total cost of the call. Please note that on multi-national sites the cost would normally be set to appear in local currency.
Subtotal The subtotal cost of all outgoing calls for each user, made during the period covered by this bill excluding any local taxes.
Bill total The total cost of all outgoing calls made during the period covered by this bill excluding any local taxes.
Tax (20.0%) The amount of any local tax that applies to the bill. The tax rate is settable.
Total payable The total amount payable, including any taxes.

If you would like to go back and view any report for a larger section of the organisation, simply click on the appropriate link in the breadcrumb as shown below:

Breadcrumbs
Labels: