Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Press the ON/OFF key.
  2. Press the RECALL key.
  3. Press ## to enter the 
    Referencemacro
    LabelProgramming mode
    .
  4. Navigate to Call logging/Remote programming parameters.
  5. Go to Call logging - parity Parity check and select 1, then press the # key.
  6. Go to Call logging - evenEven/odd Odd parity and select 1, then press the the # key.
  7. Go to Call logging - baud Baud rate (SMDR) and select 4, then press the # key.
  8. Go to Call logging - stop Stop bit and select 1, then press the # key.
  9. Go to Call logging - data Data length and select 4, then press the # key.
  10. Go to Call logging - printing Printing selection out/in and select 1 for the incoming and outgoing calls.
  11. Go to Call logging - printing Printing selection local/long distance calls and select 1 to print all outgoing calls, then press the # key.
  12. Press the ON/OFF key to save the settings.
HTML
<a id="Install NetPBX"></a>

Installing NetPBX

Install and configure NetPBX

HTML
<a id="Configure TIM Plus"></a>

...

Once NetPBX is configured and collecting call logging data, log in to TIM Plus and perform the steps below:

  1. Click on the Directory tab.
  2. Choose the site you want to configure and clickclick Properties.
    Screenshotmacro
    Borderfalse
    URL/download/attachments/4817095/panasonic_dbs_1.png
  3. In the Site Properties window, select Panasonic DBS Series from the PBX model drop-down list.
  4. In the Connection method field, select No connection required from the drop-down list.
  5. Click on the Save button to apply the settings.