BT Pathway

...

<a id="Configure the SMDR output"></a>

...

To receive SMDR data from your BT Pathway you need to have a BT SystemPhone System Phone and be familiar with using how to use it to perform system programming. To enable SMDR output, follow the steps below:

1. From the programming position, press the phone set up setup key P and select System programming.
2. Enter the PIN and select System.
3. Select Call logging and choose Call logging on.
4. Press HANDSFREE/MONITOR to finish.

...

The BT Pathway phone system transmits SMDR information via a serial connection. To collect the data from the serial port and send it to TIM Plus, you first need to install the NetPBX netpbx software. For setup instructions, click on the link below:

Install and configure NetPBX

<a id="Configure TIM Plus"></a>

...

Once NetPBX is configured and is collecting data, log in to TIM Plus and follow the steps below:

1. Click on the Directory tab.
2. Choose the site you want to configure and click Properties.
   

   Screenshotmacro
   Border false URL /download/attachments/4817051/bt_pathway_1.png

3. In the Site Properties window, select BT Pathway from the PBX model drop-down list.
4. In the Connection method field, select No connection required from the drop-down list.
5. Click on the Save button to apply the settings.