Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Pbxsummary
RequiredTask4Configure TIM Plus
Supportfiles1Unify OpenScape Business.TDT
Supportfiles2Unify OpenScape Business.TDS
Supportfiles3Unify OpenScape Business.DBS
ConnectionDSN connection
RequiredTask1Configure the SMDR output
RequiredTask2Configure the Set up a DSN connection
RequiredTask3Configure the interface file

HTML
<a id="Configure the SMDR output"></a>

Configuring the SMDR output

Follow the instructions below to configure the SMDR output in your phone system. These instructions are taken from the Unify OpenScape Busines Business manual:.

  1. Log on to OpenScape Business Assistant and click on
    Buttonmacro
    LabelSetup
    ->
    Buttonmacro
    LabelWizards
    ->
    Buttonmacro
    LabelCentral Telephony
    , as shown below:
    Screenshotmacro
    Borderfalse
    URL/download/attachments/1504053715040530/unify_openscape_business_1.png
  2. Click
    Buttonmacro
    LabelEdit
    to start the
    Referencemacro
    LabelCall Detail Recording
    wizard.
  3. In the new window that opens, tick the
    Keywordmacro
    LabelActivate Call Charge Recording
    to enable the CDR output, as shown below:
    Screenshotmacro
    Borderfalse
    URL/download/attachments/1504053715040530/unify_openscape_business_2.png
HTML
<a id="SettingSet up a DSN connection"></a>

Setting up a DSN connection

The default SMDR output option in the Unify OpenScape Business phone system is

Referencemacro
LabelHTTPS
. To enable TIM Plus to work with Unify OpenScape Business, you first need to set up a DSN connection, by following the steps below:

...

HTML
 <a id="Configure the interface file"></a>

Configuring the interface file

 

Follow the steps below to configure the interface file to establish an HTTPS connection with your Siemens OpenOfficeUnify OpenScape Business:

  1. Open the Siemens OpenOfficeUnify OpenScape Business.TDT file, located by default in C:\Program Files (x86)\Tri-Line\TIM Plus\config.
  2. Edit the file to point to the IP address of your Siemens OpenOffice your Unify OpenScape Business and enter the relevant username and password, as shown below:
    Screenshotmacro
    Borderfalse
    URL/download/attachments/1504053715040530/unify_openscape_business_tdt_1.png
  3. Remove the apostrophe (') in front of the amended fields to enable them. An example of a configured interface file is shown below:
    Screenshotmacro
    Borderfalse
    URL/download/attachments/1504053715040530/unify_openscape_business_tdt_2.png
HTML
<a id="ConfiguringConfigure TIM Plus"></a>

Configuring TIM Plus

Once the DSN connection has been set up, log in to TIM Plus and follow the steps below:

  1. Click on the Directory tab.
  2. Choose the site you want to configure and click Properties.
    Screenshotmacro
    Borderfalse
    URL/download/attachments/15040537/unify_openscape_business_tim_DSN.png
  3. In the Site Properties window, select Siemens OpenOffice Unify OpenScape Business from the PBX model drop-down list.
  4. In the Connection method field, select Connect to a system DSN from the drop-down list.
  5. In the DSN name field, select Siemens OpenOffice Unify OpenScape Business from the drop-down list.
  6. In the Frequency field, enter 5.
  7. In the DB script field, select Siemens Unify OpenScape Business from the drop-down list.
  8. Click on the Save button to apply the settings.