Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

HTML
<a id="Configure the SMDR output"></a>

Configuring your SMDR output

The SMDR output on the LG IPLDK is disabled by default has SMDR output disabled. Below you will find the programming number codes and the fields that need to be configured.. To enable the output, you need to amend the following settings in the programming sections below:

Print Serial Port Selection (PGM 175)

Within In this window you need , set Info/On-line SMDR to Telnet 1. This will allow  to send call logging data to TIM Plus to connect to the LG IPLDK on TCP over TCP to port 23 to receive SMDR data.

Below is an example of the Print Serial Port Selection window:

Screenshotmacro
Borderfalse
URLhttp://docs.call-logger.com:8090/download/attachments/4817111/lg_ipldk_1.png

SMDR Attributes (PGM 177)

Below is an example of Set the SMDR Attributes window as shown below:

Screenshotmacro
Borderfalse
URLhttp://docs.call-logger.com:8090/download/attachments/4817111/lg_ipldk_2.png

ISDN Attributes (PGM 200)

Below is an example of Set the ISDN Attributes window. Please note  as shown below, ensuring that the CLI Print to serial field needs to be is enabled.:

Screenshotmacro
Borderfalse
URLhttp://docs.call-logger.com:8090/download/attachments/4817111/lg_ipldk_3.png

...

If your LG IPLDK has been configured to send the its call logging data via TCP/IP, follow the steps below to configure TIM Plus:

  1. Click on the Directory tab.
  2. Click on Choose the site configured during the setup wizard your want to configure and click Properties.
    Screenshotmacro
    Borderfalse
    URLhttp://docs.call-logger.com:8090/download/attachments/4817111/lg_ipldk_4.png
  3. Within In the Site Properties window, select LG IPLDK from the PBX model drop-down list.
  4. In the Connection method field, select Actively connect to PBX from the drop-down list.
  5. In the Host field, enter the IP Address address of your LG IPLDK.
  6. In the Port field, enter in 23.
  7. Leave the Username and Password fields blank.
  8. In the Connection script field, select Generic Simple from the drop-down list.
  9. Click on the Save button to apply the settings.

...