Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Configuring your SMDR output

...

Info

Before enabling the SMDR output, you will need to speak with your phone maintainer to buy the required licenses for your Alcatel phone system.

Alcatel-Lucent OmniPCX Office Communication Server supports two types of call metering:

  • V24 metering supports V24 printing for all call metering tickets
  • IP metering supports IP printing for call metering tickets originating from a 3rd party application (Business or Hotel) via an IP connection

The type of metering must be specified when the Office Link driver is installed. The driver can be set to one of two modes:

Keywordmacro
Labelhotel
 or
Keywordmacro
Labelmetering
. You can use the
Referencemacro
LabelOMC Counting
 function to specify the type of call metering for hardcopy printouts.

To set printing options for call metering tickets, follow the steps below:

  1. Open the
    Referencemacro
    LabelCounting
     function window in the OMC console and select the Accounting Printouttab.
  2. Select the metering type from the drop-down list:    Ext. Accounting Activation IP or Ext. Accounting Activation V24.
  3. Click OK to save the settings.

The table below presents a summary of the data output from an Alcatel:

Screenshotmacro
Borderfalse
URL/download/attachments/4817041/alcatel_pbxs.png

...

Install and configure NetPBX

HTML
<a id="Configure TIM Plus"></a>

...

Once NetPBX is configured and collecting data, log in to TIM Plus and apply perform the following settingssteps:

  1. Click on the Directory tab.
  2. Select Choose the site you configured during the setup wizard want to configure and click Properties.
    Screenshotmacro
    Borderfalse
    URL/download/attachments/4817043/alcatel_omnipcx_office_3.png
  3. Within In the Site Properties window, select Alcatel OmniPCX Office from the PBX model drop-down list.
  4. In the Connection method field, select No connection required from the drop-down list.
  5. Click on the Save button to apply the settings.