These instructions help you configure your AGFEO AC-AS phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.
Connection TypeTIM Plus establishes a serial connection with this PBX.
Support FilesAGFEO AC-AS Series.TDT
Required TasksConfigure the SMDR output
Configure TIM Plus
Configuring your SMDR output
For more information about the output and configuration of your SMDR data, please contact your system maintainer.
The AGFEO phone system sends SMDR information via a serial connection. To collect the call logging data from the serial port and send it to TIM Plus, you first need to install thesoftware. For setup instructions, click on the link below:
Configuring TIM Plus
Once NetPBX is configured and collecting data, log in to TIM Plus and perform the following steps:
- Click on the tab.
- Choose the site you want to configure and click .
- In the Site Properties window, select AGFEO AC-AS Series from the PBX model drop-down list.
- In the Connection method field, select No connection required from the drop-down list.
- Click on the button to apply the settings.