Skip to end of metadata
Go to start of metadata

These instructions help you configure your Siemens OpenOffice phone system to work with TIM Enterprise. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Connection Type
  TIM Enterprise establishes a TCP connection to this PBX.

Support Files
  Siemens OpenOffice.TDT
  Siemens OpenOffice.TDS
Required Tasks
  Configure the SMDR output
  Configure TIM Enterprise

Configure the SMDR output

Follow the steps below to enable the SMDR output in your telephone system:

  1. Log in to the Siemens OpenOffice web portal.
  2. Click on Expert Mode and then select  Basic Settings.
  3. Under the Call Charges menu options, select  Call Charges - Output Format and tick the SMDR options shown below:

  4. Under CDR System options, select LAN-TCP-Client from the drop-down list, as the output format.
  5. In the TCP-Client field, enter the IP address of the PC running TIM Enterprise and the port number that you want your SMDR data to be sent to.
  6. Click on the Apply tab to save the changes.

Configure TIM Enterprise

Follow the steps below to configure TIM Enterprise to collect the SMDR data from your telephone system:

  1. Click on the Directory tab.
  2. Locate the PBX object you want to configure in the Directory, right-click on it and select Properties.
  3. A new window will open, displaying the general properties of your PBX object. Select Siemens OpenOffice from the Data format list and tick the Keep a local backup of data box, as shown below: 

  4. Click on the Connection tab and select Establish TCP connection to PBX from the Connection method list.
  5. In the Host field, enter the IP address of your telephone system.
  6. In the Port field, enter the port number you have configured in the telephone system.
  7. Leave the Username and Password fields blank.
  8. In the IP script field, select Siemens OpenOffice from the drop-down list.
  9. Click on the Save button to apply the settings.