These instructions help you configure your LG iPECS phone system to work with TIM Enterprise. Contact your system maintainer if you are not familiar with the configuration of your PBX.
Connection Type
TIM Enterprise establishes a TCP connection to this PBX.
Support Files
LG iPECS.TDT
LG.TDS
Required Tasks
Configure the SMDR output
Configure TIM Enterprise
Configuring the SMDR output
The SMDR output in LG iPECS is disabled by default. To enable the output, you need to amend the following settings in the programming sections below:
SMDR Attributes (PGM 177)
| Field | Description |
|---|---|
| Save Enable | Leave this as the default, which is unticked |
| Print Enable | This needs to be enabled by clicking on the check box |
| SMDR Record Call Type | This needs to be set to 'All Calls', you will need to select this from the drop-down list |
| Records In Detail | This needs to be enabled by clicking on the check box |
| Print Incoming Call | This needs to be enabled by clicking on the check box |
| Print Lost Call | This needs to be enabled by clicking on the check box |
| SMDR Dial Digit Hidden | Leave this as the default which is '0' |
| SMDR Currency Unit | Leave this as the default which is blank |
| SMDR Cost Per Metering Pulse | Leave this as the default which is blank |
| SMDR Fraction | Leave this as the default which is '0' |
| SMDR Start Time | Leave this as the default which is '0' |
| SMDR Hidden Digit | Leave this as the default which is 'Right' |
| Long Distance Call Digit Counter | Leave this as the default which is '0' |
| Long Distance Code (Max 2 Digits) | Leave this as the default |
| MSN Print on SMDR | Leave this is the default which is unticked |
| Print Caller Number | This needs to be enabled by clicking on the check box |
Here is an example of a populated SMDR Attributes screen:
Printer Port Selection (PGM 175)
In the Printer Port Selection (PGM 175) window, set Info/On-line SMDR to Telnet 1 to send call logging data to TIM Enterprise over TCP to port 23.
ISDN Attributes (PGM 200)
To enable CLI information in the call records produced by your LG iPECS, you need to set the CLI Print To Serial to ON, as shown below:
Configuring TIM Enterprise
Follow the steps below to configure TIM Enterprise to collect the SMDR data from your LG iPECS:
- Click on the tab.
- Locate the PBX object you want to configure in the Directory, right-click on it and select Properties.
- A new window will open, displaying the general properties of your PBX object. Select LG iPECS from the Data format list and tick the Keep a local backup of data box, as shown below:
- Click on the tab and select Establish TCP connection to PBX from the Connection method list.
- In the Host field, enter the IP address of your LG iPECS.
- In the Port field, enter 23.
- Leave the Username and Password fields blank.
- In the IP script field, select Generic Simple from the drop-down list.
- Click on the button to apply the settings.
