<p>These instructions should assist in configuring your Alcatel 4400e
 to work with TIM Plus. If you are not familiar with PBX
 configuration, please contact your system maintainer.</p>

<table class="confluenceTable">
	<tbody>
		<tr>
			<th class="confluenceTh" width=158>Connection information</th>
			<th class="confluenceTh">Description</th>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Connection type</b></td>
			<td class="confluenceTd"><b>Serial Output: </b>
				The Alcatel 4400e sends SMDR information via a serial connection. The most recents units will have a .v24 port, older units will require you to purchase a .v24 module. You will need to directly connect 
				a serial cable from the Alcatel 4400e .v24 module to the PC that NetPBX is installed and running on.
			</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Cable configuration</b></td>
			<td class="confluenceTd">Straight-through.
			</td>
		</tr>
	</tbody>
</table>

<h2>Configuring your SMDR</h2>

<p>The Alcatel 4400e will need to be configured to output SMDR information.</p>

<p>See table below for a summary of data output from Alcatel 4400e:</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_plus/pbx/alcatel_pbxs.png" alt="Alcatel PBXs" />

<h2>Configuring TIM Plus</h2>

<p>Below you will find steps on how to configure TIM Plus to listen for SMDR data from your Alcatel 4400e:</p>

<ol>
	<li>Browse to TIM Plus as normal and login with your credentials.</li>
	<li>Click on the <span class="button no_margin">Directory</span> tab.</li>
	<li>Click on the site configured during the setup wizard and click <span class="button no_margin">Properties</span>or create a new site and click <span class="button no_margin">Properties</span>.</li>
	<img class="screenshot border" src="http://www.tri-line.com/common/img/documentation/tim_plus/pbx/alcatel_4400e_1.png" alt="Alcatel 4400e" />
	<li>Within the <span class="reference">Site Properties</span> window, select <span class="keyword">Alcatel 4400e</span> from the <span class="reference">PBX model</span> drop-down list.</li>
	<li>In the <span class="reference">Connection method</span> field select <span class="keyword">No connection required</span> from the drop-down list.</li>
	<li>Finally, click on the <span class="button no_margin">Save</span> button.</li>
</ol>