These instructions help you configure your AYCTelecom IPcts to work with TIM Enterprise. Contact your system maintainer if you are not familiar with the configuration of your PBX.

<a id="Configure the SMDR output"></a>

Configuring your SMDR output

Follow the steps below to set up the SMDR output of your IPcts through its management web page:

1. Log in to your AYCTelecom IPcts management web page.
2. Select the System tab
3. Select the SMDR/Log tab and configure the fields on the page as below:
• SMDR Server Enabled: Enable the check box.
• SMDR Server Output: Choose Network Address.
• SMDR Client IP Address: Enter the IP address of the computer running TIM Enterprise.
• SMDR Client Port: Enter the TCP port number you want to send the SMDR data to. You can use any free TCP port, but we would recommend one in the 9000 range.
4. Click the Update button.
5. Click the Commit Changes button at the top of the page so save your settings.

Here is an example screenshot of the SMDR configuration screen from the AYCTelecom IPcts management web page:

<a id="Configure TIM Enterprise"></a>

Configuring TIM Enterprise

Follow the steps below to configure TIM Enterprise to listen for SMDR data from your AYCTelecom IPcts phone system:

1. Click on the Directory tab.
2. Locate the PBX object you want to configure in the Directory, right-click on it and select Properties.
3. A new window will open, displaying the general properties of your PBX object. Select AYCTelecom IPCTS from the Data format list and tick the  box, as shown below:
   
4. Click on the Connection tab and select Listen for connections from PBX from the Connection method list.
5. Leave the Host field blank.
6. In the Port field, enter the TCP port that was configured on your AYCTelecom IPcts (e.g. 9000).
7. Click on the Save button to apply the settings.