This guide details the steps required to run the built-in web server of Echo over HTTPS rather than HTTP.

As an example, it is assumed you want to bind the HTTPS server to IP address using port .  Change these values to suit your own requirements.

Prerequisites

This guide presumes you have already installed your (valid) SSL certificate into the  certificate store using the account, since Echo runs as a system service in that context.

Start a command prompt with administrator privileges to perform the following steps:

Find the certificate thumbprint

First, use the MMC certificate snap-in to find your installed certificate:

Binding to an endpoint

The next step creates a binding between endpoint that Echo will be listening on and the SSL certificate you want to use

An endpoint is a combination of an IP address and a port number.  In our example, the endpoint is .

To see which endpoints are currently bound to which certificates, issue the following command:

 
netsh http show sslcert
 
SSL Certificate bindings:
-------------------------
    IP:port                 : 192.168.0.179:443
    Certificate Hash        : 00112233445566778899aabbccddeeff00112233
    Application ID          : {aaaaaaaa-bbbb-cccc-dddd-eeeeeeeeeeee}
    Certificate Store Name  : MY
    Verify Client Certificate Revocation    : Enabled
    Verify Revocation Using Cached Client Certificate Only    : Disabled
    Usage Check    : Enabled
    Revocation Freshness Time : 0
    URL Retrieval Timeout   : 0
    Ctl Identifier          :
    Ctl Store Name          :
    DS Mapper Usage    : Disabled
    Negotiate Client Certificate    : Disabled

    IP:port                 : 192.168.0.179:8443
    Certificate Hash        : 112233445566778899aabbccddeeff0011223344
    Application ID          : {00000000-1111-2222-3333-444444444444}
    Certificate Store Name  : (null)
    Verify Client Certificate Revocation    : Enabled
    Verify Revocation Using Cached Client Certificate Only    : Disabled
    Usage Check    : Enabled
    Revocation Freshness Time : 0
    URL Retrieval Timeout   : 0
    Ctl Identifier          : (null)
    Ctl Store Name          : (null)
    DS Mapper Usage    : Disabled
    Negotiate Client Certificate    : Disabled

The Certificate Hash is the thumbnail of the currently-bound certificate.

If a binding already exists for the endpoint you want to use, remove it with the following command:

netsh http delete sslcert ipport=192.168.0.179:8443

 


netsh http show sslcert


netsh http add sslcert ipport=192.168.0.179:8443 certhash=0011223344556677889900112233445566778899 appid={ecc39c98-e826-4009-9401-2a5c6e7babbc}