These instructions help you configure your Draytek phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

<a id="Configure your SMDR output"></a>

Configuring your router

To enable SysLog events on your phone system perform the steps below:

1. Access the web interface of your DrayTek router and navigate to >> , as shown below:
   
2. Check the box to activate the SysLog fuction
3. Check the  box to save the logs to the SysLog server
4. Enter the IP address of TIM Enterprises's SysLog server, to which CDR data will be sent
5. Check the box, to enable the output of call logging data.
6. Click on the  button to save the settings.