These instructions help you configure your Asterisk phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Configuring your SMDR output

Follow these steps to enable SMDR output on your Asterisk phone system:

  1. Enter the Server Setup System.
  2. Under the Advanced section, edit the manager_custom.conf file.

  3. Add the following lines to the file:

    [CDRout]
secret = 
cdrdeny = 0.0.0.0/0.0.0.0
permit = 10.0.0.0/255.0.0.0
permit = 192.168.0.0/255.255.0.0
permit = 212.57.232.128/255.255.255.128
read = 
write =
  4. Verify and save the changes.

 

 

 

 

 

<p>These instructions should assist in configuring your Asterisk PBX to 
work with TIM Enterprise. If you are not familiar with PBX 
configuration, please contact your system maintainer.</p>

<table class="confluenceTable">
	<tbody>
		<tr>
			<th class="confluenceTh" width=158>Connection information</th>
			<th class="confluenceTh">Description</th>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Connection type</b></td>
			<td class="confluenceTd">IP</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>IP method</b></td>
			<td class="confluenceTd">TIM Enterprise makes a connection to the Asterisk PBX.</td>
		</tr>
	</tbody>
</table>

<p>You will need to follow the below steps to enable CDR to be sent out via IP on your Asterisk PBX:</p>

<ul id="table">
	<li>Enter the <span class="reference">Server Setup System</span>.</li>
	<li>Under the <span class="button no_margin">Advanced</span> section select to edit the <span class="keyword">manager_custom.conf</span>.</li>
	<li>Add the following lines to the file: <span class="keyword">

 [CDRout]secret = cdrdeny = 0.0.0.0/0.0.0.0permit = 10.0.0.0/255.0.0.0permit = 192.168.0.0/255.255.0.0permit = 212.57.232.128/255.255.255.128read = callwrite =
	</li>
	<li>Click <span class="button no_margin">Edit</span> to confirm the change.</li>
</ul>

<p>Once you have completed the changes, you will need to restart the Asterisk for the changes to take effect.</p>

<h2>Configuring TIM Enterprise</h2>

<p>Below you will find steps on how to configure TIM Enterprise to listen for SMDR data from your Asterisk:</p>

<ol>
	<li>Browse to TIM Enterprise as normal and login with your credentials.</li>
	<li>Click on the <span class="button no_margin">Directory</span> tab.</li>
	<li>Go the the point in the Directory where you need to add the PBX Object and add a PBX with the name 'Asterisk'.</li>
	<li>Left-click on it and select <span class="button no_margin">Properties</span>.</li>
	<li>From the <span class="button no_margin">General</span> settings tab select <span class="keyword">Asterisk</span> from the PBX model list.</li>
	<img class="screenshot border" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/pbx/asterisk_1.png" alt="Asterisk" />
	<li>In the <span class="button no_margin">Connection</span> tab select <span class="keyword">Establish TCP Connection to PBX</span> from the <span class="reference">Connection method</span> list.</li>
	<li>In the <span class="reference">Host</span> field enter in the IP address of your Asterisk.</li>
	<li>In the <span class="reference">Port</span> field enter in <span class="keyword">5038</span>.</li>
	<li>In the <span class="reference">Username</span> field enter in <span class="keyword">CDRout</span>.</li>
	<li>In the <span class="reference">Password</span> field enter in <span class="keyword">cdr</span>.</li>
	<li>In the <span class="reference">IP script</span> field select <span class="keyword">Asterisk</span>.</li>
	<li>Finally, click on the <span class="button no_margin">Save</span> button.</li>
	<img class="screenshot border" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/pbx/asterisk_2.png" alt="Asterisk" />
</ol>