View Source

The screen allows to see the live logging of the calls send out from your telephone system. The call logs are arranged so that the most recent calls are towards the top of the list.

Each call displayed in the Call view is colour-coded, according to the same system-wide colour scheme used across TIM Plus. These are as follows:

Green: Incoming calls
Light green: Answered transferred calls
Blue: Outgoing calls
Light blue: Outgoing non-connected calls
Gray: Internal calls
Red: Abandoned DDI calls (direct Dial in)

The calls you see in the list will depend on the placement of your login account within the system. For example, if you have access to only one site's data, you'll only see calls from that site. If you are an administrator, all calls from all sites will be shown.

Field name	Description
Date	The date the call was made.
Time	The time the call began.
Source	The information displayed in this field will depend on the type of call you are looking at. For all outgoing or internal calls, the source field will show the extension number or users name. For incoming calls, the source will show either the generic name (e.g. London, Orange, USA etc.) or, where you have added specific locations to numbers, these will be shown when identified (e.g. J Bloggs, New York Office)
Route	The information displayed in this field will be determined by the type of call. For incoming calls, the route field will show the CLI of the caller. For incoming internal calls, the route field will show either the username or extension number. For outgoing calls the route field will show the dialled number.
Destination	The information displayed in this field will be determined by the type of call. For Incoming calls the name of the user whose extension answered the call is shown. If the user has not been allocated a name, the extension number is shown. For outgoing calls the destination that was dialled is shown. Where you have added a more specific location name e.g. Joe Bloggs mobile, this will be shown instead of the generic location name. Where an internal extension has been dialled the extension dialled will be shown in square brackets [ ] as the call destination.
Response	The time it took to answer the call (i.e. response time).
Duration	Shows the duration of the call in hours, minutes and seconds (format 00:00:00).
Cost	The cost of the call will be shown for all outgoing calls. Internal and other types of calls that aren't chargeable, are shown as '00.00'.
CLI	The CLI (Caller Line Identity) field will display the phone number that calls in or the name associated with this, if a Contact list has been provided.
Dialled Number	The Dialled Number field will show the number dialled by the caller and will apply to all call types.
Source name	The name of the person who made the call.
Source ID	The ID of the person who made the call.
Destination name	The name of the called destination (e.g. Manchester, Tri-Line, London) if this is available in the tarifff table.
Destination ID	The ID of the called destination (e.g. 020 7265 2697)
Tariff	The name of the tariff/carrier used to cost the call (e.g. BT.)
Tariff band	The tariff band is the classification which we apply to groups of numbers (e.g. International, National, Mobile etc.)
Account code	The account code associated with the call.
LCR Digits	The LCR (Least Code Routing) digits used to route the call over an alternative carrier.
Trunk access code	The trunk access code used.
Data source	The location where the call originated.
Call reference	Any call reference number associated with this call.
Flags	Flags associated with the call. These flags are graphically represented as follows: When the speech lozenge is grey it means that there is no associated call recording. This may be because this is an internal call or because the system has been set to exclude this user from call recording i.e. "Do not record calls for this user". Click on this speech lozenge icon to listen to the recording associated to this call. Click on this gray blank star icon to score this call. Click on the coloured star icon to view the score for this call. Click on this grey blank note icon to add a note to this call. Click on this coloured note icon to review notes associated with this call. When the legs icon is grey it means that there are no legs associated with this call. Click on this green legs icon to see additional legs associated with this call.
Voice location	The voice location is the Unique ID (UIV) of the Magic Box associated with this recording. It appears so that you can identify which magic box the recording was associated with. This feature is typically only used for engineering purposes. The voice location is only relevant on sites with multiple magic boxes.
Voice filename	This is the call reference that identifies the unique call recording ID. We use this to tag the recording to the associated CDR.

<p>This screen shows a live call view of your telephone 
system. Calls are arranged such that the most recent calls are towards 
the top of the list.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_plus/call_view.png" alt="Live call view" />

<p>Each call displayed is colour-coded according to the same system-wide 
colour scheme used across TIM Plus. These are as follows:</p>

<ul>
	<li><b style="color: #779122;">Green</b>: Incoming calls</li>
	<li><b style="color: #aadf46;">Light green</b>: Answered transferred calls</li>
	<li><b style="color: #2391cb;">Blue</b>: Outgoing calls</li>
	<li><b style="color: #94c2d9;">Light blue</b>: Outgoing non-connected calls</li>
	<li><b style="color: #A0A0A0;">Gray</b>: Internal calls</li>
	<li><b style="color: #ed1d1d;">Red</b>: Abandoned DDI calls (direct Dial in)</li>
</ul>

<p>The calls you see in the list will depend on the placement of your login
 in the directory. For example, if you only have access to one site's 
data, you'll only see calls from that site. If you are an administrator,
 all calls from all sites will be shown.</p>

NOTE: Calls shown in lighter shades of the colours above indicate that they were transferred.

<p>Here is a brief description of each columns available for display on the <span class="reference">Most recent calls</span> screen:</p>

<table class="confluenceTable">
	<tbody>
		<tr>
			<th class="confluenceTh" width=120>Fild name</th>
			<th class="confluenceTh">Description</th>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Date</b></td>
			<td class="confluenceTd">The date the call was made on.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Time</b></td>
			<td class="confluenceTd">The time the call began.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Source</b></td>
			<td class="confluenceTd">The colour of the call will identify the type of call: green for 
				incoming, blue for outgoing, red for lost and grey for internal. For all
				 outgoing or internal calls the extension number or users name will be 
				shown in the source field. For incoming calls, the source will show 
				either the generic name e.g. London, Orange,  USA etc. Where you have 
				added specific locations to numbers, these will be shown when 
				identified. e.g. J Bloggs, New York Office.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Route</b></td>
			<td class="confluenceTd">The information shown will be determined by the type of call. For 
				incoming calls (show in green) the CLI of the caller will 
				be shown. For incoming internal calls, either the username or extension 
				number will be shown (in grey). All outgoing calls are displayed in blue
				 with the dialled number displayed in the route field.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Destination</b></td>
			<td class="confluenceTd">For outgoing calls the destination that was dialled is shown. All 
				National, International and Mobile numbers are shown. Where you have 
				added a more specific location name e.g. Joe Bloggs mobile, this will be
				 shown instead of the generic location name.
				<p>Where an internal extension has been dialled the extension dialled will be shown in square brackets [ ] as the call destination.</p>
				<p>For Incoming calls the name of the user whose extension answered the 
				call is shown. If the user has not been allocated a name, the extension 
				number is shown.</p></td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Response</b></td>
			<td class="confluenceTd">The time it took to answer the call i.e. response time.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Duration</b></td>
			<td class="confluenceTd">Shows the duration of the call in hours, minutes and seconds format 00:00:00.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Cost</b></td>
			<td class="confluenceTd">The cost of the call will be shown for all outgoing calls.  Internal and
 			other types of calls that aren't chargeable, are shown as '00.00'.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>CLI</b></td>
			<td class="confluenceTd">If you are looking to find calls that came in from a particular number, 
				type the caller line identification number in here.  As with Dialled 
				number, you may enter partial numbers.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Dialled Number</b></td>
			<td class="confluenceTd">If you are looking for calls to a specific number, type the number in 
				here. If you enter a partial number e.g. 07828, it will find all numbers
 				beginning with the digits 07828.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Source name</b></td>
			<td class="confluenceTd">The name of the person who made the call.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Source ID</b></td>
			<td class="confluenceTd">The ID of the person who made the call.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Destination name</b></td>
			<td class="confluenceTd">The name of the destination called e.g. Manchester, Tri-Line, London.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Destination ID</b></td>
			<td class="confluenceTd">The ID of the destination called e.g. 020 7265 2697.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Tariff</b></td>
			<td class="confluenceTd">The name of the tariff/carrier used to cost the call e.g. BT.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Tariff band</b></td>
			<td class="confluenceTd">The tariff band is the classification which we apply to groups of numbers e.g. International, National, Mobile etc.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Account code</b></td>
			<td class="confluenceTd">The account code associated with the call.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>LCR Digits</b></td>
			<td class="confluenceTd">The LCR digits used to route the call over an alternative carrier.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Trunk access code</b></td>
			<td class="confluenceTd">The trunk access code used.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Data source</b></td>
			<td class="confluenceTd">The location where the call originated.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Call reference</b></td>
			<td class="confluenceTd">Any call reference number associated with this call.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Flags</b></td>
			<td class="confluenceTd">Flags associated with the call. These flags are graphically represented as follows:
				<ul style="list-style: none;">
					<li>
						<img class="icon" src="http://www.tri-line.com/common/img/documentation/tim_plus/gray_recording_button.png" alt="Listen to the recording button" />&nbsp; 
						When the speech lozenge is grey it means that there is no associated call recording. This may be because this is an internal call or because the system has been set to exclude this user from call recording i.e. "Do not record calls for this user".
					</li>
					<li>
						<img class="icon" src="http://www.tri-line.com/common/img/documentation/tim_plus/recording_button.png" alt="Listen to the recording button" />&nbsp; 
						Click on this speech lozenge icon to listen to the recording associated to this call.
					</li>
					<li>
						<img class="icon" src="http://www.tri-line.com/common/img/documentation/tim_plus/score_button.png" alt="Score the call" />&nbsp;
						Click on this gray blank star icon to score this call.
					</li>
					<li>
						<img class="icon" src="http://www.tri-line.com/common/img/documentation/tim_plus/scored_button.png" alt="View the score" />&nbsp;
						Click on the coloured star icon to view the score for this call.
					</li>
					<li>
						<img class="icon" src="http://www.tri-line.com/common/img/documentation/tim_plus/note_button_1.png" alt="Add a note button" />&nbsp;
						Click on this grey blank note icon to add a note to this call.
					</li>
					<li>
						<img class="icon" src="http://www.tri-line.com/common/img/documentation/tim_plus/note_button_2.png" alt="Review notes button" />&nbsp;
						Click on this coloured note icon to review notes associated with this call.
					</li>
					<li>
						<img class="icon" src="http://www.tri-line.com/common/img/documentation/tim_plus/gray_add_button.png" alt="No legs" />&nbsp;
						When the legs icon is grey it means that there are no legs associated with this call.
					</li>
					<li>
						<img class="icon" src="http://www.tri-line.com/common/img/documentation/tim_plus/add_button.png" alt="See additional legs" />&nbsp;
						Click on this green legs icon to see additional legs associated with  this call.
					</li>
				</ul>
			</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Voice location</b></td>
			<td class="confluenceTd">The voice location is the Unique ID (UIV) of the Magic Box associated with this recording. It appears so that you can identify 
			which magic box the recording was associated with. This feature is typically only used for engineering purposes. The voice location is only relevant on sites with multiple magic boxes.
	</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Voice filename</b></td>
			<td class="confluenceTd"> This is the call reference that identifies the unique call recording ID. We use this to tag the recording to the associated CDR.
			</td>
		</tr>
	</tbody>
</table>