<a id="Introduction"></a>

Introduction

The Missed Calls report analyses your missed calls data in order to reveal which callers have or haven't been responded to. Each missed call is given a priority rating depending on how many times and how often a caller attempted to make contact. The time window in which a call must be responded to - if it is to be considered handled - is user-definable.

<a id="Running the report"></a>

Running the report

On the Reports screen, click on Missed Calls in the reports list and then press the Select this report button.

A new window will appear, where you can select the criteria for your report.

Selecting the reporting period

Every report requires a period to run over. This is generally defined as the "Reporting period".

There are several preset periods that can be selected from a drop-down list. The predefined periods are based on a standard Gregorian calendar and are defined as follows:

PeriodDescription
TodayThe start and end dates are set to the current date. The start time is set to 00:00:00 and the end time to 23:59:59.
YesterdayThe start and end dates are set to the current date minus one day. The start time is set to 00:00:00 and the end time to 23:59:59.
This weekThe start date is set to the first day (normally Monday) of the current week. The end date is set to the current day. The start time is set to 00:00:00 and the end time to the current time.
Last weekThe start date is set to the date of the last Monday, and the end date is set to the start date plus seven days. The start time is set to 00:00:00 and the end time to 23:59:59.
This monthThe start date is set to the first day of the current month. The end date is set to the current day. The start time is set to 00:00:00 and the end time to the current time.
Last monthThe start date for this period is set in three stages. The day is set to 01, the month is set to the current month minus one, or in the case of January, it is set to 12. The year is set to the current year, unless it is a new year, in which case the year is reduced by one. The start and end times are set to 00:00:00 and 23:59:59 respectively.
This yearThe start date is set to the first day of the first month of the current year, whilst the end date is set to today's date. The start and end times are set to 00:00:00 and 23:59:59 respectively.
All callsThe start and end dates and times are set to the date and time of the first and last call in the entire call database, respectively.
Custom periodEnter the start and end dates and times into the boxes below. The start and end times are linked to their respective dates.

If you want to be more specific, you can choose the Custom period from the drop-down list. This option will allow you to define the Start date and End date yourself, as well as the Start time and End time of the calls you want to report on.

When the report is executed, the reporting engine will substitute the start and end dates based on the current date or the relevant selection made by the user.

Once you have set the report's period, click on theNextbutton to set more of the report's parameters or select theFinishbutton to run the report.

Selecting the reporting entity

The reporting entity paramater allows you to select which part of your organisation you want to run the report for (site, extension group, channels or individual extensions).

Site

TIM Plus will allow you to log information from up to five sites. If you want to report on a particular site, select your preferred site from the drop-down list, alternatively leave the default settings as All sites.

The username and password you have been allocated might be restricted to a specific site or group. If you need additional permissions, please contact your system administrator.

Group

There is no limit to the number of groups you can create on one site. Groups, like sites are available as a drop-down list. You can choose to report on a specific group or leave the default setting as All groups.

Please note that the drop-down list for each group will appear only if a site has already been selected.

User

Once a site and group has been selected, you can also choose to report on a particular user from the drop-down list, or you can leave the default setting as All users.

Once you have set the report's entities, click on theNextbutton to set more of the report's features or select theFinishbutton to run the report.

Selecting the report filters

This option allows you to filter out certain calls from your results, by selecting the values of the parameters.

These filters allow you to be very specific, when deciding the call information you would like to display in the final report.If you do not want to select any filters, simply press theNextbutton to skip.

Please find a brief description of all filters below:

Account code

If you want to produce a bill consisting of all chargeable calls made using a particular account code, enter this code in the field provided. 

To report on more than one account code, you can use a comma to separate the entries.

Call type

This filter allows you to define the type of call you would like to report on. If you would like to report on all calls, leave the default setting as All calls.

If you want to report on one call type in particular, expand the drop-down list and select from the available options.

Carrier

If you use more than one carrier, you can choose which carrier's calls to report on. To report on all calls from all carriers, leave the default setting as All carriers.

If you only use one carrier, there will be no drop-down list available and no option to choose a different carrier.

CLI

The Caller Line Identification (CLI) is a phone number that calls your organisation. This is sometimes withheld by the person making the call.

You may choose to report on calls from a particular CLI or from numbers beginning with a particular CLI. For example, for calls from Tri-Line you would enter 02072652600.

This filter accepts the comparison operators ! and * (e.g. to exclude calls from Tri-Line, you would use !020726526*). To report on more than one CLI, user a comma to separate the entries.

Cost

If you want to add a filter for call costs, type in the cost you wish to define, as shown below. 

This filter allows you to specify a range (-) or use comparison operators (>, <, ! and *).

Destination

If you want to filter calls to a specific, known destination, you can type the destination in the field provided. This filter accepts the comparison operators ! and *.

For example, if you want to exclude all calls to France, enter , as shown below:

Dialled number

To filter calls to a specific number, type the number that was dialled in the box provided. The dialled number can be a number that you dial out, or a DDI number within your organisation that someone dials in to get to a particular extension.

To filter calls to a specific area, a partial number may be entered (e.g. 0033, for calls to France). 

This filter accepts the comparison operators ! and (e.g. to exclude calls to 0207 265, enter !0207265* ).

Duration

To filter calls above or below a particular duration, enter the number of seconds and the relevant symbol in the box provided. This filter allows you to specify a range (-) or use comparison operators (>, <, ! and *).

In the above example, the filter will look for calls longer than 1800 seconds (30 minutes). Alternatively, you may want to exclude calls below a certain threshold (e.g. below 3 seconds).

LCR code

If you are using Least Cost Routing (LCR), you may want to filter your results the by LCR code, in order to check a bill from your LCR provider. To do this, enter the LCR code in the box provided.

This filter accepts the comparison operators ! and * (e.g. to exclude a specific LCR code, add the code with the required operators !162*)

Response

This option allows you to filter calls based on their response time.The results will be filtered according to the response time threshold that you define in the provided field. The threshold you specify will be measured in seconds.

In the above example, the search results will display calls that have a response time above 10 seconds.

Start time

This option allows you to filter calls based on the start time of the call, which is basically the time of day the call started. Enter your preferred start time in the field provided, using the following format hh:mm:ss.
For example, if you want your results to include calls logged after 10 a.m. only, you need to enter 10:00:00 in the Start time field, as shown below:

Selecting the report options

This section allows you to further narrow down your report results, by excluding certain types of calls or sorting the results in a particular manner. The filters are fairly self-explanatory. For example, if you would like to exclude weekend calls from the report, simply tick the option to exclude weekend calls. If you would like to ignore missed calls shorter than a specific duration, simply enter the duration in the box.

Exclude weekends

This option allows you to exclude weekend calls from any results shown. If you would like to exclude weekend calls, simply select the tickbox to exclude weekend calls.

Summary only

When running a report, you may not want to display in the results every call lost. If you want to only show a summary of lost calls - instead of listing all calls - tick the box  as shown below:

Don't replace numbers with contact names

Tick this option if you do not want to replace dialled numbers, CLIs and account codes with their equivalent names, as defined in your web user's contacts list(s).

Notes only

This option allows you to display only calls that have notes stored against them.

Audio only

This option allows you to display only calls that have a voice recording file associated to them.

Sort order

Choose whether you would like the results of the report to appear in ascending or descending order, by selecting from the drop-down box.

Sort results by

You may choose the order in which results are sorted, by selecting the appropriate option from the list provided.

Ignore missed calls shorter than

If you would like to exclude short calls from your report, enter the duration below which you'd like to ignore calls. If you would like to exclude very short calls (e.g. calls below 3 seconds), simply enter the number  in the box provided:

Missed calls

Callback interval

This options allows you to define the window in which a call must be responded to, in order to be cosidered as handled ( i.e. 24 = 24 hours).The default callback interval is 24 hours but you may enter in any number here.

Missed calls

Selecting the report format

This section allows you to choose the output format of your report. To select the desired format, click on the drop-down list and choose from the available options: Web, PDF, Excel, CSV and XML. More details about each report format are available in the Setting the report format section above.

<a id="Creating the report"></a>

Creating the report

When you have chosen a reporting period, and are happy with your selections, you have two options:

If you click on the Run now button, the report will run instantly in your chosen format.

If you want to schedule the report to run at a later time, follow the instruction given in the Schedule a report section.

<a id="The report's results"></a>

The report's results

When selecting WEB as the output format, this report will appear as below. To view details of any filters or selection parameters used in creating this report, simply click on About this report on the top-right corner of the page.

As with all reports, the header of the report includes:

The WEB format allows for complete flexibility when viewing any report. All headers are clickable, allowing you to re-arrange the report layout in seconds, to sort the calls in ascending or decending order based on the header clicked.

The report has two clear tabs, Missed and Handled calls. The Missed calls tab shows calls that were missed but never responded to. The Handled calls tab shows calls that were missed initially but eventually responded to.

Missed calls

The headers of this report are as follows:

HeaderDescription
First AttemptThis column displays the date and time that the first call was missed.
CLIThe Calling Line Identity of the caller. Note this field will be blank if withheld.
ContactThe person or extension number who missed the call. If several were call, the word 'Various' will appear here.
Avg ring timeThe average duration that the caller held for before hanging up. Note the period is determined by the Call back period set in the Options page e.g. 24 hours.
AttemptsThe number of times the caller tried to get through without success.
Priority The priority field allows you to prioritise those who called most often with the shortest ring time between calls. The priority is determined by the difference in time between the first and last call divided by the number of times they called.

Where more than one attempt has been made, simply click to expand and see all attempts.

Handled calls

The headers of this report are as follows:

HeaderDescription
HandledThis column displays the date and time that the call was actually handled.
CLIThe Calling Line Identity of the caller. Note this field will be blank if withheld.
ContactThe person or extension number who missed the call. If several were call, the word 'Various' will appear here.
DurationThe average duration that the caller held for before hanging up. Note the period is determined by the Call back period set in the Options page e.g. 24 hours.
AttemptsThe number of times the caller tried to get through without success.
Priority The priority field allows you to prioritise those who called most often with the shortest ring time between calls. The priority is determined by the difference in time between the first and last call divided by the number of times they called.

To get more details on the previous lost calls, i.e. missed calls before it was eventually handled, simply click on the call and all calls will be displayed as shown below. The red calls are the earlier missed calls. Any calls shown in green were handled by a later inbound call being answered. Calls shown in blue were handled when someone made an outbound call.

If you would like to go back and view this report for a larger section of the organisation, click on the appropriate link in the breadcrumb, as shown below:-