These instructions help you configure your NEC DXE phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

<a id="Configure the SMDR output"></a>

Configure your SMDR output

The NEC DXE phone system sends SMDR information via a serial connection. You need to directly connect a serial cable from your NEC DXE to the PC that NetPBX is installed and running on.

By default, the SMDR output of your NEC DXE is not enabled. For more information about enabling and configuring the SMDR output, you should speak to your system maintainer.

<a id="Install NetPBX"></a>

Installing NetPBX

To collect the data from the serial port and send it to TIM Plus, you first need to install the NetPBX software. For setup instructions, click on the link below:

Install and configure NetPBX

<a id="Configure TIM Plus"></a>

Configuring TIM Plus

Once NetPBX is configured and collecting data, log in to TIM Plus and perform the following steps:

1. Click on the Directory tab.
2. Choose the site you want to confogure and clickProperties.
   
3. Within the Site Properties window, select NEC DXE from the PBX model drop-down list.
4. In the Connection method field, select No connection required from the drop-down list.
5. Click on the Save button to apply the changes.