These instructions help you configure your Mitel SX50 phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.
<a id="Configure the SMDR output"></a> |
By default, the SMDR output of your Mitel is not enabled. To enable it, perform the steps below:
Ensure the option is enabled.
<a id="Install NetPBX"></a> |
The Mitel SX50 phone system sends SMDR information via a serial connection. To collect the data from the serial port and send it to TIM Plus, you will first need to install the NetPBX software. For setup instructions, click on the link below:
<a id="Configure TIM Plus"></a> |
Once NetPBX is configured and collecting data, log on to TIM Plus as usual and apply the following settings: