These instructions help you configure your Asterisk phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

<a id="Configure the SMDR output"></a>

Configuring  your SMDR output

Follow these steps to enable SMDR output on your Asterisk phone system:

  1. Enter the 
  2. Under the Advanced section, edit the manager_custom.conf file.

  3. Add the following lines to the file:

    [CDRout]
secret = 
cdrdeny = 0.0.0.0/0.0.0.0
permit = 10.0.0.0/255.0.0.0
permit = 192.168.0.0/255.255.0.0
permit = 212.57.232.128/255.255.255.128
read = 
callwrite =
  4. Verify and save the changes.
<a id="Configure TIM Plus"></a>

Configuring TIM Plus

Follow the steps below to configure TIM Plus for collection of SMDR data from your Asterisk PBX:

  1. Log in to TIM Plus and click on the Directory tab.
  2. Select the site you configured during the setup wizard and click .
  3. Within the Site Properties window, select Asterisk from the PBX model drop-down list.
  4. In the Connection method field, select Actively connect to PBX from the drop-down list.
  5. In the Host field, enter the IP address of your Asterisk phone system.
  6. In the Port field, enter 5038.
  7. In the Username and Password fields, enter your username and password accordingly.
  8. In the Connection script field, select Asterisk from the drop-down list.
  9. Click on the Save button to apply the settings.