Stats alarms are alarms that can be added to a selected element of a stats collection point (Stats point), in order to trigger an alert if a specific condition is met (e.g. the number of outbound calls is above 100 or the number of concurrent lines in use exceeds 20).The criteria that must be met to trigger an alarm is user-defined, and email alerts can be sent to one or more recipients.

Call statistics alarms are simply a variation of the standard "alarm" directory object and provide an additional means of keeping a tab on call patterns.

<a id="Adding a Stats alarm"></a>

Adding a Stats alarm

To add a Stats alarm, select theStats alarmstab, then click on theAddbutton as shown below:

A new window will appear, allowing you to name and configure the elements that will trigger the alarm.

General

Under the tab, you can name your Stats alarm and select the Stats point you want to place the alarm on.

To provide a name for the Stats alarm, simply fill in the Name field, as shown below:

To select the Stats point you would like to monitor, click on theFindbutton, then drill up and down in the Directory to select the Stats point you are searching for. Once you find it, select it by clicking on the  icon, as shown below:

The Stats point will appear afterwards under theGeneraltab, as shown below:

Criteria

Next step is to select the criteria you would like to use to trigger the alarm. To do this, select theCriteriatab, as shown below:

The criteria available to choose from are described below:-

Count

The alarm will be triggered when the count meets, exceeds, is less than or equal to a pre-determined value. e.g. When busy channels equals 10 or busy channels > 10.