These instructions help you configure your LG IPLDK phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

<a id="Configure the SMDR output"></a>

Configuring your SMDR output

The LG IPLDK by default has SMDR output disabled. Below you will find the programming number codes and the fields that need to be configured.

Print Serial Port Selection (PGM 175)

Within this window you need set Info/On-line SMDR to Telnet 1. This will allow TIM Plus to connect to the LG IPLDK on TCP port 23 to receive SMDR data.

Below is an example of the Print Serial Port Selection window:

SMDR Attributes (PGM 177)

Below is an example of the SMDR Attributes window:

ISDN Attributes (PGM 200)

Below is an example of the ISDN Attributes window. Please note that the CLI Print to serial field needs to be enabled.

<a id="Install NetPBX"></a>

Installing NetPBX

If your LG IPLDK has been configured to send SMDR data via a serial connection, you will first need to install the NetPBX software to collect the data from the serial port and send it to TIM Plus. For setup instructions, click on the link below:

Install and configure NetPBX

<a id="Configure TIM Plus"></a>

Configuring TIM Plus

Once NetPBX is configured and collecting data, log on to TIM Plus as usual and apply the following settings:

1. Click on the Directory tab.
2. Click on the site configured during the setup wizard and click Properties.
   
3. Within the Site Properties window, select LG IPLDK from the PBX model drop-down list.
4. In the Connection method field, select No connection required from the drop-down list.
5. Click on the Save button to apply the settings.