These instructions help you configure your NEC NEAX phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.
![](/plugins/servlet/confluence/placeholder/macro?definition=e3BieHN1bW1hcnk6U3VwcG9ydGZpbGVzMT1ORUMgTkVBWC5URFMgfFN1cHBvcnRmaWxlczI9TkVDIE5FQVguVERTIHxDb25uZWN0aW9uPUFjdGl2ZSBjb25uZWN0aW9ufFJlcXVpcmVkVGFzazE9Q29uZmlndXJlIHRoZSBTTURSIG91dHB1dHxSZXF1aXJlZFRhc2syPUNvbmZpZ3VyZSBUSU0gUGx1c30&locale=en_GB&version=2)
<a id="Configure the SMDR output"></a> |
Configure the SMDR output
To enable the SMDR output in your NEC NEAX phone system, you will have to speak with your phone maintainer.
<a id="Configure the SMDR output"></a> |
Configuring TIM Plus
Once NetPBX is configured and collecting data, log on to TIM Plus as usual and apply the following settings:
- Click on the Directory tab.
- Select the site configured during the setup wizard and clickProperties.
![](/plugins/servlet/confluence/placeholder/macro?definition=e3NjcmVlbnNob3RtYWNybzpCb3JkZXI9ZmFsc2V8VVJMPWh0dHA6Ly9kb2NzLnRyaS1saW5lLmNvbTo4MDkwL2Rvd25sb2FkL2F0dGFjaG1lbnRzLzEyNTgzMjc4L25lY19uZWF4XzEucG5nfQ&locale=en_GB&version=2)
- Within the Site Properties window, select NEC NEAX from the PBX model drop-down list.
- In the Connection method field, select Actively connect to PBX from the drop-down list.
- In the Host field, enter the IP Address of your NEC NEAX.
- In the Port field, enter in 2599.
- Leave the Username and Password fields blank.
- In the Connection script field, select NEC NEAX 2000 IVS from the drop-down list.
- Finally, click on the Save button to apply the settings.