<p>These instructions should assist in configuring your Mitel SX50 to 
work with TIM Plus. If you are not familiar with PBX 
configuration, please contact your system maintainer.</p>

<table class="confluenceTable">
	<tbody>
		<tr>
			<th class="confluenceTh" width=158>Connection information</th>
			<th class="confluenceTh">Description</th>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Connection type</b></td>
			<td class="confluenceTd"><b>Serial Output: </b>
				Mitel SX50 PBX sends SMDR information via a serial connection. You will need to directly connect a serial cable from the SX50 PBX to the PC that NetPBX is installed and running on.
			</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Cable configuration</b></td>
			<td class="confluenceTd">Straight-through.
			</td>
		</tr>
	</tbody>
</table>

<h2>Configuring your SMDR</h2>

<p>By default the Mitel SX50 doesn't have SMDR enabled. To enable SMDR 
for the Mitel SX50 you need to follow the steps below:

<ol>
	<li>Access the programming interface.</li>
	<li>Within the programming interface you need to access <span class="button no_margin">Systems Options Programming</span>.</li>
	<li>Access Command 100, register 14.</li>
	<li>You will be presented with four options. You need to enable <span class="keyword">Enabled for both incoming and outgoing trunk calls</span>.</li>
	<li>Make sure that SMDR is enabled in all of your <span class="reference">Class of Services (Command 121-129)</span> and trunk groups (Command 151-156).</li>
</ol>

<h2>Configuring TIM Plus</h2>

<p>Below you will find steps on how to configure TIM Plus to listen for SMDR data from your Mitel SX50:</p>

<ol>
	<li>Browse to TIM Plus as normal and login with your credentials.</li>
	<li>Click on the <span class="button no_margin">Directory</span> tab.</li>
	<li>Click on the site configured during the setup wizard and click <span class="button no_margin">Properties</span>or create a new site and click <span class="button no_margin">Properties</span>.</li>
	<img class="screenshot border" src="http://www.tri-line.com/common/img/documentation/tim_plus/pbx/mitel_sx50_1.png" alt="Mitel SX50" />
	<li>Within the <span class="reference">Site Properties</span> window, select <span class="keyword">Mitel SX50</span> from the <span class="reference">PBX model</span> drop-down list.</li>
	<li>In the <span class="reference">Connection method</span> field select <span class="keyword">No connection required</span> from the drop-down list.</li>
	<li>Finally, click on the <span class="button no_margin">Save</span> button.</li>
</ol>