Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version. Compare with Current ·  View Page History

This screen shows a live call view of your telephone system. Calls are arranged such that the most recent calls are towards the top of the list.

Live call view

Each call displayed is colour-coded according to the same system-wide colour scheme used across TIM Plus. These are as follows:

  • Green: Incoming calls
  • Light green: Answered transferred calls
  • Blue: Outgoing calls
  • Light blue: Outgoing non-connected calls
  • Gray: Internal calls
  • Red: Abandoned DDI calls (direct Dial in)

The calls you see in the list will depend on the placement of your login in the directory. For example, if you only have access to one site's data, you'll only see calls from that site. If you are an administrator, all calls from all sites will be shown.

NOTE: Calls shown in lighter shades of the colours above indicate that they were transferred.

Here is a brief description of each columns available for display on the Most recent calls screen:

Fild name Description
Date The date the call was made on.
Time The time the call began.
Source The colour of the call will identify the type of call: green for incoming, blue for outgoing, red for lost and grey for internal. For all outgoing or internal calls the extension number or users name will be shown in the source field. For incoming calls, the source will show either the generic name e.g. London, Orange, USA etc. Where you have added specific locations to numbers, these will be shown when identified. e.g. J Bloggs, New York Office.
Route The information shown will be determined by the type of call. For incoming calls (show in green) the CLI of the caller will be shown. For incoming internal calls, either the username or extension number will be shown (in grey). All outgoing calls are displayed in blue with the dialled number displayed in the route field.
Destination For outgoing calls the destination that was dialled is shown. All National, International and Mobile numbers are shown. Where you have added a more specific location name e.g. Joe Bloggs mobile, this will be shown instead of the generic location name.

Where an internal extension has been dialled the extension dialled will be shown in square brackets [ ] as the call destination.

For Incoming calls the name of the user whose extension answered the call is shown. If the user has not been allocated a name, the extension number is shown.

Response The time it took to answer the call i.e. response time.
Duration Shows the duration of the call in hours, minutes and seconds format 00:00:00.
Cost The cost of the call will be shown for all outgoing calls. Internal and other types of calls that aren't chargeable, are shown as '00.00'.
CLI If you are looking to find calls that came in from a particular number, type the caller line identification number in here. As with Dialled number, you may enter partial numbers.
Dialled Number If you are looking for calls to a specific number, type the number in here. If you enter a partial number e.g. 07828, it will find all numbers beginning with the digits 07828.
Source name The name of the person who made the call.
Source ID The ID of the person who made the call.
Destination name The name of the destination called e.g. Manchester, Tri-Line, London.
Destination ID The ID of the destination called e.g. 020 7265 2697.
Tariff The name of the tariff/carrier used to cost the call e.g. BT.
Tariff band The tariff band is the classification which we apply to groups of numbers e.g. International, National, Mobile etc.
Account code The account code associated with the call.
LCR Digits The LCR digits used to route the call over an alternative carrier.
Trunk access code The trunk access code used.
Data source The location where the call originated.
Call reference Any call reference number associated with this call.
Flags Flags associated with the call. These flags are graphically represented as follows:
  • Listen to the recording button  Click on this speech lozenge icon to listen to the recording associated to this call.
  • Add a note button  Click on this grey blank note icon to add a note to this call.
  • Review notesbutton  Click on this coloured note icon to review notes associated with this call.
  • See additional legsbutton  Click on this green add icon to see additional legs associated with this call.
Voice location The voice location is the Unique ID (UIV) of the Magic Box associated with this recording. It appears so that you can identify which magic box the recording was associated with. This feature is typically only used for engineering purposes. The voice location is only relevant on sites with multiple magic boxes.
Voice filename This is the call reference that identifies the unique call recording ID. We use this to tag the recording to the associated CDR.
Labels: