These instructions help you configure your Panasonic KX-TDA/E/NCP500/1000 phone system to work with TIM Enterprise. Contact your system maintainer if you are not familiar with the configuration of your PBX.
Connection Type
TIM Enterprise establishes a serial connection with this PBX.Support Files
Panasonic KX-TD Series.TDTPanasonic KX-TD Series.TDS
Required Tasks
Configure the SMDR outputInstall NetPBX
Configure TIM Enterprise
Configuring the SMDR output
Follow the steps below to configure your Panasonic phone system to output SMDR to TIM Enterprise.
- Log in to the Panasonic Maintenance Console program.
- Click on the tab from the left-hand menu.
- Click on the
tab and configure the options as shown below: - Click on the
tab and configure the options as shown below: - Click on the button to save the changes.
Installing NetPBX
The Panasonic KX-TDA/E/NCP500/1000 phone systems can send SMDR information via a serial connection. To collect the call logging data from the serial port and send it to TIM Enterprise, you first need to install the NetPBX software. For setup instructions, click on the link below:
Configuring TIM Enterprise
Once NetPBX is configured and collecting data, log in to TIM Enterprise and perform the following steps:
- Click on the tab.
- Locate the PBX object you want to configure in the Directory, right-click on it and select Properties.
- A new window will open, displaying the general properties of your PBX object. Select Panasonic KX-TD Series from the Data format list and tick the Keep a local backup of data box, as shown below:
- Click on the No connection required from the Connection method list. tab and select
- Click on the
button to apply the settings.
Labels: