You are viewing an old version of this page. View the current version.
Compare with Current ·
View Page History
These instructions help you configure your LG iPECS phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.
Connection Type
TIM Plus listens for connections from this PBX.Support Files
LG iPECS.TDTLG.TDS
Required Tasks
Configure the SMDR outputConfigure TIM Plus
Configuring your SMDR output
The LG iPECS by default has SMDR output disabled. Below you will find the programming number codes and the fields that need to be configured.
SMDR Attributes (PGM 177)
Within this window you need to set Info/On-line SMDR to Telnet 1. This will allow TIM Plus to connect to the LG iPECS on TCP port 23 to receive SMDR data.
Below is an example of the SMDR Attributes window:
Printer Port Selection (PGM 175)
Below is an example of the Programming Port Selection window:
Configuring TIM Plus
If your LG iPECS has been configured to send the data via TCP/IP, follow the steps below to configure TIM Plus:
- Click on the tab.
- Click on the site configured during the setup wizard and click
. - Within the Site Properties window, select LG iPECS from the PBX model drop-down list.
- In the Connection method field, select Listen for connections from PBX from the drop-down list.
- In the Host field, enter in the IP Address of your LG iPECS.
- In the Port field, enter in 23.
- Click on the button to apply the settings.
Labels: