You are viewing an old version of this page. View the current version.
Compare with Current ·
View Page History
These instructions help you configure your Alcatel OmniPCX Office phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.
Connection Type
TIM Plus establishes a DSN connection with this PBX.
Support Files
Alcatel OmniPCX Office.TDT
Alcatel OmniPCX Office.TDS
Required Tasks
Configure the SMDR output
Install Alcatel Office Link Driver
Set up a DSN connection
Configure TIM Plus
Configuring your SMDR
Below you will find instructions on how to configure the SMDR output for your Alcatel OmniPCX Office phone system.
Alcatel-Lucent OmniPCX Office Communication Server supports two types of call metering:
- V24 metering supports V24 printing for all call metering tickets.
- IP metering supports IP printing for call metering tickets originating from a 3rd party application (Business or Hotel) via an IP connection.
The type of metering must be specified when the Office Link driver is installed. The driver can be installed in one of two modes: hotel or metering. You can use the OMC Counting function to specify the type of call metering for hardcopy printouts.
To set printing options for call metering tickets, please follow the steps below:
- Open the Counting function window in the OMC console and select the tab.
- Select the metering type from the drop-down box: Ext. Accounting Activation IP or Ext. Accounting Activation V24 , and ensure that the associated checkbox is checked.
- When finished, click .
The table below presents a summary of data output from Alcatel:
Install Alcatel Office Link Driver
If your Alcatel OmniPCX Office has been configured to send SMDR data via IP, you will first need to install the Alcatel Office Link Driver to configure the output.
For information on how to install the Alcatel Office Link Driver, please refer to the Alcatel OmniPCX Office manual.