Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version. Compare with Current ·  View Page History

These instructions help you configure your Aastra MX-ONE phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Connection Type
  TIM Plus establishes a serial connection with this PBX.

Support Files
  Aastra MX-ONE BC10.TDT
  Aastra MX-ONE BC10.TDS
Required Tasks
  $paramRequiredTask1

For your SMDR configuration, Aastra MX-ONE has multiple output formats. TIM Plus requires the SMDR format to be set to BC8, BC10 or BC13

Configuring TIM Plus

 

These instructions should assist in configuring your Aastra MX-ONE to work with TIM Plus. If you are not familiar with PBX configuration, please contact your system maintainer.

Connection information Description
Connection type Serial Output: The Aastra MX-ONE sends SMDR information via a serial connection which is located on Aastra MX-ONE unit itself. You will need to directly connect a serial cable from the Aastra MX-ONE to the PC that NetPBX is installed and running on.
Cable configuration Null-modem/Crossover.

For your SMDR configuration, Aastra MX-ONE has multiple output formats. TIM Plus requires the SMDR format to be set to BC8 or BC10.

Configuring TIM Plus

Below you will find steps on how to configure TIM Plus to listen for SMDR data from your Aastra MX-ONE BC10:

  1. Browse to TIM Plus as normal and login with your credentials.
  2. Click on the Directory tab.
  3. Click on the site configured during the setup wizard and click Properties or create a new site and click Properties.
  4. Aastra MX-ONE BC10
  5. Within the Site Properties window, select Aastra MX-ONE BC10 from the PBX model drop-down list.
  6. In the Connection method field select No connection required from the drop-down list.
  7. Finally, click on the Save button.
Labels: