Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version. Compare with Current ·  View Page History

To add a code to your tariff table, click on the Add code button at the top-right corner of the screen, as shown below:


A new window will appear, where you can edit the properties of your dial code:


Each field in the Dial code properties window is described below:

FieldDescription
CodeThe new code you want to add to the tariff table.
BandThe charge band you want to apply to the current dial code.
LocationThe geographical location you want to associate with the current dial code.
Code pattern

If your code needs to match a specific digit pattern, use the # symbol to construct the pattern and mask the necessary digits. For example, enter 020########*  for a London phone number, which indicates that the number must start with 020 and to be followed by at least eight digits in order to be valid.

When you have finished configuring these properties, click on the OK button to apply the changes.


 

 

 

Adding a code is very simple. All you need to do is click on Add code as highlighted in red below:

Add code

The following screen will appear:

Add code

Add the code then select a cost band from the drop-down list and add a location, as shown below. Then click OK

Add code
Labels: