<h2>Introduction</h2>

<p>This report shows how quickly your inbound call traffic is being answered compared to
pre-defined answer time thresholds.</p>

<p>You can compare data by year, month, day or hour, and a visual indication
is shown of how many calls were answered inside each threshold,
alongside tabular data.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_plus/inbound_call_performance_1.png" alt="Inbound call performance" />

<h2>Running the report</h2>

<p>On the <span class="reference">Reports</span> screen, click on <span class="reference">Inbound call performance</span> in the reports list and then press the <span class="button">Select this report</span> button.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_plus/inbound_call_performance_2.png" alt="Inbound call performance" />

<p>The following report selection criteria window appears:</p>

<h4>Reporting period</h4>

<p>Every report requires a period to run over. This is generally defined as the "Reporting period".</p>

<img class="screenshot border" src="http://www.tri-line.com/common/img/documentation/tim_plus/period_screen.png" alt="Inbound call performance" />

<p>There are several pre-defined periods that can be selected from a simple drop-down list as shown above.</p>

<p>The built-in periods are based on a standard Gregorian calendar and are defined as follows:</p>

<table class="confluenceTable">
	<tbody>
		<tr>
			<th class="confluenceTh" width=98>Period</th>
			<th class="confluenceTh">Description</th>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Today</b></td>
			<td class="confluenceTd">The start date and end date is set to the current date. The default start time is set to <span class="keyword">00:00:00</span> and the end time to the current time.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Yesterday</b></td>
			<td class="confluenceTd">The start date and end date is set to the current date minus one day. The start time is set to <span class="keyword">00:00:00</span> and the end time to <span class="keyword">23:59:59</span>.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>This week</b></td>
			<td class="confluenceTd">The start date is set to the Monday of the current week, whilst the end date is set to the current day. The default start time is set to <span class="keyword">00:00:00</span> and the end time to the current time.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Last week</b></td>
			<td class="confluenceTd">The start date is set to the last Monday, whilst the end date is set to the start date plus seven days. The start time is set to <span class="keyword">00:00:00</span> and the end time to <span class="keyword">23:59:59</span>.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>This month</b></td>
			<td class="confluenceTd">The start date is set to the 1<span class="exponent">st</span> day of the current month and the end date to today. The default start time is set to <span class="keyword">00:00:00</span> and the end time to the current time.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Last month</b></td>
			<td class="confluenceTd">The start date for this period is set in three stages. The day is set to <span class="keyword">01</span>, the month is set to the current month minus one, or in the case of January, 
			it is set to <span class="keyword">12</span>. The year is set to the current year, unless it is a new year, in which case the year is reduced by one. The start and end times are set to 
			<span class="keyword">00:00:00</span> and <span class="keyword">23:59:59</span> respectively.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>This year</b></td>
			<td class="confluenceTd">The start date is set to the first day of the first month of the current year. The end date is set to today's date. The start and end times are set to <span class="keyword">00:00:00</span> and <span class="keyword">23:59:59</span> respectively.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>All calls</b></td>
			<td class="confluenceTd">The start date is set to the date of the first call in the database, whilst the end date is set to the date of the most recent call in the database. Times are also set to the times of the first and last calls in the database.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Custom period</b></td>
			<td class="confluenceTd">Enter the start and end dates and times into the boxes below. The start and end times are linked to their respective dates.</td>
		</tr>
	</tbody>
</table>

<p>If you want to be more specific, you can choose the <span class="keyword">Custom period</span> from the bottom of the drop-down list. This option
will allow you to define the start date and end date yourself, as shown below. When you need to be even more specific,
you can also choose a start time and end time.</p>

<img class="screenshot border" src="http://www.tri-line.com/common/img/documentation/tim_plus/custom_period_screen.png" alt="Inbound call performance" />

<p>When the report is executed, if the user has selected an in-built period, the reporting engine simply substitutes the start
and end dates based on the current date and the period the user selected.</p>

<p>Once you have set the report's period, click on the <span class="button">Next</span> button to set more of the report's features or select the <span class="button">Finish</span> button to run the report.</p>

<h4>What do you want to report on?</h4>

<p>In addition to the reporting period, each report offers you the opportunity to define exactly what you want to report on. This is
generally a site, group or user.</p>

<h5>Site</h5>

<img class="screenshot border" src="http://www.tri-line.com/common/img/documentation/tim_plus/entity_screen_1.png" alt="Inbound call performance" />

<p>TIM Plus will allow you to log information from up to five sites. If you want to report on a specific site, select that site from
the drop-down list or to select all sites' data, leave it at the default <span class="keyword">All sites</span> as shown above.</p>

<h5>Group</h5>

<img class="screenshot border" src="http://www.tri-line.com/common/img/documentation/tim_plus/entity_screen_2.png" alt="Inbound call performance" />

<p>There is no limit to the number of groups available on each site. Groups, like sites are available as a drop-down list. You
can choose to select a specific group or leave at the default <span class="keyword">All groups</span>. Please note that the drop-down list for each
group can only appear if a site has already been selected.</p>

<h5>User</h5>

<img class="screenshot border" src="http://www.tri-line.com/common/img/documentation/tim_plus/entity_screen_3.png" alt="Inbound call performance" />

<p>Once a site and group has been selected, you can decide whether you would like to report on all users or select a
particular user from the drop-down list as shown above.</p>

<p>Once you have set the report's entities, click on the <span class="button">Next</span> button to set more of the report's features or select the <span class="button">Finish</span> button to run the report.</p>

<h4>Filter call information</h4>

<img class="screenshot border" src="http://www.tri-line.com/common/img/documentation/tim_plus/filter_screen_inbound_call_performance.png" alt="Inbound call performance" />

<p>You have the option of filtering the information, based on a number of call filters. These filters allow you to be very
specific, when deciding the call information you would like in the final report.</p>

<p>If you do not want to select any filters, simply press the <span class="button">Next</span> button to skip.</p>

<p>Please find a brief description of all filters below:</p>

<h5>Account code</h5>

<p>If you want to produce a bill consisting of all chargeable calls made using a particular account code, enter the account code in this filed. To report on more than one account code, simply comma separate.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_plus/account_code_exmpl.png" alt="Account code" />

<h5>Call type</h5>

<p>This filter allows you to define the type of call you would like to report on. If you would like to report on all calls, leave at the default <span class="keyword">All calls</span>.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_plus/call_type_exmpl.png" alt="Call type" />

<h5>Carrier</h5>

<p>If you use more than one carrier, you can choose which carriers calls you would like to report on.</p>

<p>To report on all calls from all carriers, leave at default.</p>

<p>If you only use one carrier, there will be no drop-down list available and no option to choose a different carrier.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_plus/carrier_exmpl.png" alt="Carrier" />

<h5>CLI</h5>

<p>The Caller Line Identification (CLI) is the number associated with the incoming call. This is sometimes withheld by the person making the call.</p>

<p>You may choose to report on calls from a particular CLI or from numbers beginning with a particular CLI by entering the number in here. For example, for calls from Tri-Line you would enter in "02072652600". This filter accepts the comparison operators <span class="keyword">!</span> and <span class="keyword">*</span>, e.g. to exclude calls from Tri-Line use "!020726526*".</p>

<p>To report on more than one CLI, simply comma separate.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_plus/cli_exmpl.png" alt="CLI" />

<h5>Dialled number</h5>

<p>To filter calls to a specific number, type the number in the dialled number field. To filter calls to a specific area, a partial number may be entered here e.g. "0033" for calls to France. This filter accepts the comparison operators <span class="keyword">!</span> and <span class="keyword">*</span>, e.g. to exclude calls to 0207 265, enter "!0207265*".</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_plus/dialled_number_exmpl.png" alt="Dialled number" />

<h5>Duration</h5>

<p>To filter call above or below a particular duration, simply enter the number of seconds and the relevant symbol. This filter accepts range (<span class="keyword">-</span>) and comparison operators (<span class="keyword">></span>, <span class="keyword"><</span>, <span class="keyword">!</span> and <span class="keyword">*</span>).</p>

<p>In the example nearby, the filter will look for calls above 1800 seconds (30 minutes). Alternatively you may want to exclude calls below a certain threshold e.g. below 3 seconds.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_plus/duration_exmpl.png" alt="Duration" />

<h5>LCR code</h5>

<p>If you are using Least Cost Routing (LCR), you may want to filter by LCR code in order to check a bill from your LCR provider. To do this simply enter the LCR code in the LCR field. This filter accepts the comparison operators <span class="keyword">!</span> and <span class="keyword">*</span>, e.g. to exclude a specific LCR code, simply add as follows "!162*".</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_plus/lcr_code_exmpl.png" alt="LCR code" />

<h5>Response</h5>

<p>This filter allows you to filter based on the response times to calls. You have the option of
filtering for calls above or below a threshold. You can define this threshold in the box
alongside.</p>

<p>The figure relates to seconds. e.g. the example nearby shows 10 seconds. By
selecting from the drop-down list, you will be able to filter calls that took more than 10
seconds to answer or see calls answered in less than 3 seconds.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_plus/response_exmpl.png" alt="Response" />

<h5>Start time</h5>

<p>This filter allows you to filter calls based on the start time. This is the time of day
when the call started in the format <span class="keyword">hh:mm:ss</span>, e.g. if you want calls after 8 a.m. only, then enter the start time in as "08:00:00" as shown nearby.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_plus/start_time_exmpl.png" alt="Start time" />

<h5>Trunk access code</h5>

<p>If you want to filter by Trunk access code, simply enter the Trunk access code in this field. This filter accepts the comparison operators <span class="keyword">!</span> and <span class="keyword">*</span>. The <span class="keyword">*</span> is not needed if it's an exact match, so the 9 for TAC should just be "!9", e.g. to exclude all calls with access code 9, add "!9" to the TAC field.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_plus/trunk_access_code_exmpl.png" alt="Trunk access code" />

<h4>Specific Options</h4>

<img class="screenshot border" src="http://www.tri-line.com/common/img/documentation/tim_plus/options_screen_inbound_call_performance.png" alt="Inbound call performance" />

<p>This section allows you to add more specific filters to your report. The filters are fairly self-explanatory.</p>

<h5>Exclude weekends</h5>

<p>This option gives you the option of excluding weekend calls from any results shown. If you would like to exclude weekend
calls, simply select the tickbox to exclude weekend calls.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_plus/weekends.png" alt="Inbound call performance" />

<h5>Exclude transfers</h5>

<p>Select this option if you would like to exclude transfers when running a report. For example if you were running an
incoming call analysis report and wanted to see only how well calls were answered when first presented, you would
choose the option on excluding transfers.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_plus/transfers.png" alt="Inbound call performance" />

<h5>Hide unused</h5>

<p>This option gives you the option of excluding unused extensions from the results shown. To exclude unused extension,
simply tick the box as shown below:</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_plus/hide_unused.png" alt="Inbound call performance" />

<h5>Thresholds</h5>

<p>When running a report like, for example a target response report, you may want to define your own
thresholds. You can do this by entering the response thresholds you want to report on in seconds as
shown below. This will show the response times for calls answered within 5, 10 and 20 seconds,
respectively.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_plus/thresholds.png" alt="Inbound call performance" />

<h5>Group by</h5>

<p>Select the time period you want to group calls by hour, day, month or year.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_plus/group_by.png" alt="Inbound call performance" />

<h2>Creating the report</h2>

<p>When you have chosen a reporting period, and are happy with your selections, you have two options:</p>

<ul>
	<li>Run the report now</li>
	<li>Schedule for future delivery</li>
</ul>

<img class="screenshot border" src="http://www.tri-line.com/common/img/documentation/tim_plus/run_report_screen.png" alt="Inbound call performance" />

<p>To choose your preferred option, select the appropriate button.</p>

<p>If you choose to run the report now, click the <span class="button">Run now</span> button. The results will appear immediately in your
chosen format.</p>

<p>To schedule the report for delivery at a later date, follow the instruction given on the <a href="Schedule a report">Schedule a report</a> section.</p>

<h2>Inbound call performance - The results</h2>

<p>When selecting <span class="reference">Web</span> as the output format, this report will appear as below.</p>

<p>The Web format allows for complete flexibility when viewing any report. To view details of any filters or selection parameters used in creating this report, simply click on <span class="link">About this report</span> at the top right of the page.</p> 

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_plus/inbound_call_performance_1.png" alt="Inbound call performance" />

<p>All headers are clickable allowing you re-arrange the report layout in seconds, to sort the calls in ascending or decending order based on the header clicked.</p>

<p>The report includes the usual headings, including the report's title, any
Friendly Name you assigned to it, the period of the report, and any
options you selected in the report's selection criteria window.</p>

<p>The body of the report consists of a table showing a summary of the
handling of your incoming calls on each day during the period you
selected.  Each line (or day) shows the following information:</p>

<table class="confluenceTable">
	<tbody>
		<tr>
			<th class="confluenceTh" width=110>Header</th>
			<th class="confluenceTh">Description</th>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Day</b></td>
			<td class="confluenceTd">This show the day of the month that the calls relate to. Each day is a hyper-link. To drill-down and get an hour-by-hour breakdown of calls, simply click on the day.
			</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b><img class="icon" src="http://www.tri-line.com/common/img/documentation/tim_plus/sigma.png" alt="Squiggle" /></b></td>
			<td class="confluenceTd">The total number of calls that day.
			</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b class="green">Answered</b></td>
			<td class="confluenceTd">The answered calls columm is always displayed in green. It allows you to re-order the Inbound call performance report based on incoming call information. You can re-arrange based on any of the following selection criteria:
				<ul class="table">
					<li><b>Ans:</b> The total number of answered calls taken that day.</li>
					<li><b>Avg durn:</b> The average length of an incoming answered call.</li>
					<li><b>Avg resp:</b> The average response time for calls to the entity alongside.</li>
					<li><b>Max resp:</b> The maximum response time for calls to the entity alongside.</li>
					<li><b>x-xx s:</b> This shows the % of calls that were answered within target with the target being defined here as (x-xx s). e.g. e.g. If 68% is displayed under the '0- 5 s' heading, that means that 68% of all calls were answered in less than 5 seconds. If the next threshold showed 15% under the heading 6 - 10 s, then 15% of calls were answered in between 6 and 10 seconds.</li>
					<li><b>%:</b> The green section of the graph shows the % of calls answered while the red section shows the % that were missed.</li>
				</ul>
			</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b class="red">Missed</b></td>
			<td class="confluenceTd">The missed calls column is always displayed as red. It allows you to re-order your call detail based on whichever of the following criteria is most important: 
				<ul class="table">
					<li><b><img class="icon" src="http://www.tri-line.com/common/img/documentation/tim_plus/sigma.png" alt="Squiggle" />:</b> The total number of missed calls for the day/time period alongside.</li>
					<li><b>Avg durn:</b> The average length that a missed call rang for before being abandoned.</li>
				</ul>
			</td>
		</tr>
	</tbody>
</table>

<p>You may keep drilling down into the report for more detail e.g. to see
hour-by-hour breakdowns as shown here.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_plus/inbound_call_performance_3.png" alt="Inbound call performance" />

<p>If you would like to go back and view any report for a larger section of the organisation, simply click on the appropriate link in the breadcrumb as shown below:</p>

<img class="screenshot naked" src="http://www.tri-line.com/common/img/documentation/tim_plus/breadcrumb.png" alt="Breadcrumbs" />