Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

hese instructions help you configure your Alcatel PmniPCX Enterprise phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Pbxsummary
Supportfiles1Alcatel OmniPCX Enterprise.TDT
Supportfiles2Alcatel OmniPCX Enterprise.TDS
Requiredtask1Configure the SMDR output
Requiredtask3Install NetPbx
Requiredtask2Configure TIM Plus
ConnectionSerial connection

or

Pbxsummary
Supportfiles1Alcatel OmniPCX Enterprise.TDT
Supportfiles2Alcatel OmniPCX Enterprise.TDS
Requiredtask1Configure the SMDR output
Requiredtask2Configure TIM Plus
ConnectionActive connection

Configuring your SMDR

Below you will find instructions on how to configure the SMDR output via serial or TCP/IP. These instructions are taken from the Alcatel OmniPCX Enterprise manual:

Connect to your PBX via telnet and follow the steps below:

  1. Applications (
    Buttonmacro
    LabelEnter
    ).
  2. Accounting (
    Buttonmacro
    LabelEnter
    ).
  3. Review/ Modify (
    Buttonmacro
    LabelEnter
    ).
  4. All instance (
    Buttonmacro
    LabelF1
    ).
  5. Realtime ticket output: Set this to

    Keywordmacro
    Labelethernet
    . Note that if you don't have appropriate license, you can only select V24 (serial) here.

  6. Save changes and exit.

The table below presents a summary of data output from Alcatel:

Screenshotmacro
Borderfalse
URLhttp://docs.call-logger.com:8090/download/attachments/4817041/alcatel_pbxs.png

HTML
<a id="info"></a>

 

Configuring TIM Plus

Serial output

If your Alcatel PmniPCX Enterprise has been configured to send SMDR data via a serial connection, you will first need to install NetPbx software to collect the data from the serial port and send it to Tim Plus. For setup instructions, click on the link below:

Install and configure NetPbx

Once NetPbx is configured and collecting data, log on to TIM Plus as usual and apply the following settings:

  1. Click on the
    Buttonmacro
    LabelDirectory
    tab.
  2. Click on the site configured during the setup and click
    Buttonmacro
    LabelProperties
    .
  3. Within the
    Referencemacro
    LabelSite Properties
    window, select the
    Keywordmacro
    LabelAlcatel OmniPCX Enterprise
    from the
    Referencemacro
    LabelPBX model
    drop-down list.
    Screenshotmacro
    Borderfalse
    URLhttp://docs.call-logger.com:8090/download/attachments/4817042/alcatel_omnipcx_enterprise_2.png
  4. In the 
    Referencemacro
    LabelConnection method
    field, select the
    Keywordmacro
    LabelNo connection required
    from the drop-down list.
  5. Click on the
    Buttonmacro
    LabelSave
    button to apply the settings.
TCP/IP output

If your Alcatel OmniPCX Enterprise has been configured to send the data via TCP/IP, follow the steps below to configure TIM Plus:

  1. Click on the
    Buttonmacro
    LabelDirectory
    tab.
  2. Selec the site  configured during the setup and clik
    Buttonmacro
    LabelProperties
    .
  3. Within the
    Referencemacro
    LabelSite Properties
    window, select
    Keywordmacro
    LabelAlcatel PmniPCX Enterprise
    from the
    Referencemacro
    LabelPBX model
    drop-down list.
    Screenshotmacro
    Borderfalse
    URLhttp://docs.call-logger.com:8090/download/attachments/4817042/alcatel_omnipcx_enterprise_1.png
  4. In the
    Referencemacro
    LabelConnection method
    field, select
    Keywordmacro
    LabelActively connet to PBX
    from the drop-down list.
  5. In the
    Referencemacro
    LabelHost
    field enter the IP Address of your Alcatel OmniPCX Enterprise.
  6. In the
    Referencemacro
    LabelPort
    field enter in
    Keywordmacro
    Label2533
    .
  7. Leave the
    Referencemacro
    LabelUsername
    and
    Referencemacro
    LabelPassword
    fields blank.
  8. In the
    Referencemacro
    LabelConnection script
    field select
    Keywordmacro
    LabelAlcatel OmniPCX Enterprise 7.1+
    from the drop-down list.
  9. Finally, click on the
    Buttonmacro
    Label Save
    button.

 

 

 

...

The Alcatel OmniPCX Enterprise can be configured to send its SMDR data over a serial (RS232) or an IP connection. Click on one of the links below that relates to your preferred connection method. Set all subscribers to all calls (just outbound by default).