Alcatel OmniPCX Enterprise (OXE)

hese instructions help you configure your Alcatel PmniPCX Enterprise phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

or

Configuring your SMDR

Below you will find instructions on how to configure the SMDR output via serial or TCP/IP. These instructions are taken from the Alcatel OmniPCX Enterprise manual:

Connect to your PBX via telnet and follow the steps below:

1. Applications (

   Buttonmacro
   Label Enter

   ).
2. Accounting (

   Buttonmacro
   Label Enter

   ).
3. Review/ Modify (

   Buttonmacro
   Label Enter

   ).
4. All instance (

   Buttonmacro
   Label F1

   ).

5. Realtime ticket output: Set this to

   Keywordmacro
   Label ethernet

   . Note that if you don't have appropriate license, you can only select V24 (serial) here.

6. Save changes and exit.

The table below presents a summary of data output from Alcatel:

Configuring TIM Plus

Serial output

If your Alcatel PmniPCX Enterprise has been configured to send SMDR data via a serial connection, you will first need to install NetPbx software to collect the data from the serial port and send it to Tim Plus. For setup instructions, click on the link below:

Install and configure NetPbx

Once NetPbx is configured and collecting data, log on to TIM Plus as usual and apply the following settings:

1. Click on the

   Buttonmacro
   Label Directory

   tab.
2. Click on the site configured during the setup and click

   Buttonmacro
   Label Properties

   .
3. Within the

   Referencemacro
   Label Site Properties

   window, select the

   Keywordmacro
   Label Alcatel OmniPCX Enterprise

   from the

   Referencemacro
   Label PBX model

   drop-down list.
4. In the 

   Referencemacro
   Label Connection method

   field, select the

   Keywordmacro
   Label No connection required

   from the drop-down list.
5. Click on the

   Buttonmacro
   Label Save

   button to apply the settings.

TCP/IP output

If your Alcatel OmniPCX Enterprise has been configured to send the data via TCP/IP, follow the steps below to configure TIM Plus:

...

...

...

...

...

...

...

...

...

1. In the Connection method field select Actively connect to PBX from the drop-down list.
2. In the Host field enter the IP Address of your Alcatel OmniPCX Enterprise.
3. In the Port field enter in 2533.
4. Leave the Username and Password fields blank.
5. In the Connection script field select Alcatel OmniPCX Enterprise 7.1+ from the drop-down list.
6. Finally, click on the Save button.

...

The Alcatel OmniPCX Enterprise can be configured to send its SMDR data over a serial (RS232) or an IP connection. Click on one of the links below that relates to your preferred connection method. Set all subscribers to all calls (just outbound by default).