Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

These instructions help you configure your Alcatel Alcatel 4200-4400e phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Pbxsummary
RequiredTask4Configure TIM Plus
Supportfiles1Alcatel 4400E.TDT
Requiredtask1Configure the SMDR output
Requiredtask3Install NetPbxNetPBX
Requiredtask2Configure TIM Plus
ConnectionSerial connection
RequiredTask1Configure the SMDR output
RequiredTask2Download the interface file
RequiredTask3Install NetPBX

HTML
<a id="Configure the SMDR output"></a>

Configuring your SMDR output

SMDR Output

The Alcatel 4400e needs to be configured to output SMDR information. See 4200-4400e phone system sends its call records via a serial connection. The most recent units already have a 

Referencemacro
Label.v24
port but, for older units, you may need to purchase a
Referencemacro
Label.v24
module. Connect a serial cable between your Alcatel 4200-4400e 
Referencemacro
Label.v24
module and the PC that netpbx is installed and running on. See the table below for a summary of data output from Alcatel 4200-4400e:

Screenshotmacro
Borderfalse
URLhttp://docs.call-logger.com:8090/download/attachments/4817041/alcatel_pbxs.png

HTML
<a id="Download the interface file

...

"></a>

Download the interface file 

  1. Visit Tri-Line's Gateway and download the interface filesfile, as shown below:

    Screenshotmacro
    Borderfalse
    Shadowfalse
    URLhttp://docs.call-logger.com:8090/download/attachments/4817041/alcatel_4400e_2.png
  2. Extract the
    Keywordmacro
    LabelAlcatel 4400E.ZIP
    file onto the desktopyour computer's Desktop. This should contain ZIP file contains the following filesfile
    Keywordmacro
    LabelAlcatel 4400E.TDT
    .
  3. Copy /paste the file into the following location  
    Referencemacro
    LabelC:\Program Files\Tri-Line\TIM Plus\config
     folder.

 

HTML
<a id="infoInstall NetPBX"></a>

Configuring TIM Plus

...

Installing NetPBX

...

...

...

Install and configure NetPbxOnce NetPbx NetPBX

HTML
<a id="Configure TIM Plus"></a>

Configuring TIM Plus

Once NetPBX is configured and collecting data, log on in to TIM Plus as usual and apply and perform the following settingssteps:

  1. Click on the ButtonmacroLabelDirectory tab.Click on
  2. Choose the site configured during the setup you want to configure and click ButtonmacroLabel Properties.
    Within the
    Referencemacro
    LabelSite Properties
    , select
    Keywordmacro
    LabelAlcatel 4400E.TDT
    from the
    Referencemacro
    LabelPBX model
    drop-down list.
    Screenshotmacro
    Borderfalse
    URLhttp://docs.call-logger.com:8090/download/attachments/4817041/alcatel_4400e_1.png
  3. In the
    Referencemacro
    LabelConnection field
    , select
    Keywordmacro
    LabelNo connection required
    from the drop-down list.Click on the
    Buttonmacro
    LabelSave
    button to apply the changes.

 

 

...

  1. Site Properties window, select Alcatel 4400e from the PBX model drop-down list.
  2. In the Connection method field, select No connection required from the drop-down list.
  3. Click on the Save button to apply the settings.