Aastra BP

...

If you are using firmware which is older than R12, you need to setup set the SMDR output to type 

BP firmware R13+

If you are using firmware R13+, you will need to set the SMDR output to

...

The Aastra BP phone system sends SMDR information via a serial connection. To collect the data from the serial port and send it to TIM Plus, you will first need to install the NetPBX software. For setup instructions, click on the link below:

Install and configure NetPBX

<a id="Configure TIM Plus"></a>

...

Once NetPBX is configured and collecting data, log on in to TIM Plus as usual and apply perform the following settingssteps:

1. Click on the Directory tab.
2. Click on Choose the site configured during the setup wizard you want to configure and click Properties.
   

   Screenshotmacro
   Border false URL http://docs.call-logger.com:8090/download/attachments/4817023/aastra_bp_2.pnghttp://docs.call-logger.com:8090/download/attachments/4817023/aastra_bp_2.png

3. Within In the Site Properties window, select choose Aastra BP from the PBX model drop-down list.
4. In the Connection method field, select No connection required from the drop-down list.
5. Click on the Save button to apply the settings.