Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

If you are using firmware which is older than R12, you need to setup set the SMDR output to type 

Keywordmacro
LabelCIL 3
 which is a fixed format requiring no further configuration.

BP firmware R13+

If you are using firmware R13+, you will need to set the SMDR output to

Keywordmacro
LabelFlexible CIL
and configure the options as below:

Screenshotmacro
Borderfalse
URLhttp://docs.call-logger.com:8090/download/attachments/4817023/aastra_bp_1.png

HTML
<a id="Install NetPBX"></a>

Installing NetPBX

...

Install and configure NetPBX

HTML
<a id="Configure TIM Plus"></a>

...

Once NetPBX is configured and collecting data, log on in to TIM Plus as usual and apply perform the following settingssteps:

  1. Click on the Directory tab.
  2. Click on Choose the site configured during the setup wizard you want to configure and click Properties.
    Screenshotmacro
    Borderfalse
    URLhttp://docs.call-logger.com:8090/download/attachments/4817023/aastra_bp_2.pnghttp://docs.call-logger.com:8090/download/attachments/4817023/aastra_bp_2.png
  3. Within In the Site Properties window, select choose Aastra BP from the PBX model drop-down list.
  4. In the Connection method field, select No connection required from the drop-down list.
  5. Click on the Save button to apply the settings.