Versions Compared

Old Version 22

changes.mady.by.user Editor

Saved on

compared with

New Version Current

changes.mady.by.user Technical Support

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Pbxsummary
Supportfiles1Aastra BP.TDSTDT
Supportfiles2Aastra BP.TDTTDS
Additionaltasks3Install NetPBX
Requiredtask1Configure the SMDR outputTIM Plus
Requiredtask3Install NetPbxNetPBX
Requiredtask2Configure TIM Plusthe SMDR output
ConnectionSerial connection
RequiredTask1Configure the SMDR output
Additionaltasks1Configure your SMDR
RequiredTask2Install NetPBX
Additionaltasks2Configure TIM Plus
RequiredTask3Configure TIM Plus

HTML
<a id="Configure the SMDR output"></a>

Configuring your SMDR output

BP firmware R12 or older

If you are using firmware which is older than R12, you need to setup set the SMDR output to type 

Keywordmacro
LabelCIL 3
 which is a fixed format requiring no further configuration.

BP firmware R13+

If you are using firmware R13+, you will need to set the SMDR output to

Keywordmacro
LabelFlexible CIL
and configure the options as below:

Screenshotmacro
Borderfalse
URLhttp://docs.call-logger.com:8090/download/attachments/4817023/aastra_bp_1.png

Configuring TIM Plus

Below you will find steps on how to configure TIM Plus to listen for SMDR data from your Aastra BP:

  1. Log on to Tim Plus as normal and click on the
    Buttonmacro
    LabelDirectory
    tab.
  2. Click on the site configured during the setup wizard and click
    Buttonmacro
    LabelProperties
    .
  3. Within the
    Referencemacro
    LabelSite properties
    window, select
    Keywordmacro
    LabelAastra BP
    from the
    Referencemacro
    LabelPBX model
    drop-down list.

Screenshotmacro
Borderfalse
URLhttp://docs.call-logger.com:8090/download/attachments/4817023/aastra_bp_2.png

  1. In the
    Referencemacro
    LabelConnection method
    field, select
    Keywordmacro
    LabelNo connection required
    from the drop-down list.
  2. Finally, click on the
    Buttonmacro
    LabelSave
    button to apply the changes.

 

</hr> <p>These instructions should assist in configuring your Aastra BP to work with TIM Plus. If you are not familiar with PBX configuration, please contact your system maintainer.</p> <table class="confluenceTable"> <tbody> <tr> <th class="confluenceTh" width=158>Connection information</th> <th class="confluenceTh">Description</th> </tr> <tr> <td class="confluenceTd"><b>Connection type</b></td> <td class="confluenceTd"><b>Serial Output: </b> As the Aastra BP sends SMDR information via a serial connection which is located on BP unit itself. You will need to directly connect a serial cable from the Aastra BP to the PC that NetPBX is installed and running on. </td> </tr> <tr> <td class="confluenceTd"><b>Cable configuration</b></td> <td class="confluenceTd">Null-modem/Crossover. </td> </tr> </tbody> </table> <h2>Configuring your SMDR</h2> <h4>BP firmware R12 or older</h4> <p>If you are using firmware which is older than R12, you need to setup the SMDR output to <span class="keyword">CIL3</span>.</p> <h4>BP firmware R13+</h4> <p>If you are using firmware R13+, you will need to set the SMDR output to <span class="keyword">Flexible CIL</span> and configure the options as below:</p> <img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_plus/pbx/aastra_bp_1.png" alt="Aastra BP" /> <h2>Configuring TIM Plus</h2> <p>Below you will find steps on how to configure TIM Plus to listen for SMDR data from your Aastra BP:</p> <ol> <li>Browse to TIM Plus as normal and login with your credentials.</li> <li>Click on the <span class="button no_margin">Directory</span> tab.</li> <li>Click on the site configured during the setup wizard and click <span class="button no_margin">Properties</span> or create a new site and click <span class="button no_margin">Properties</span>.</li> <img class="screenshot border" src="http://www.tri-line.com/common/img/documentation/tim_plus/pbx/aastra_bp_2.png" alt="Aastra BP" /> <li>Within the <span class="reference">Site Properties</span> window, select <span class="keyword">Aastra BP</span> from the <span class="reference">PBX model</span> drop-down list.</li> <li>In the <span class="reference">Connection method</span> field select <span class="keyword">No connection required</span> from the drop-down list.</li> <li>Finally, click on the <span class="button no_margin">Save</span> button.</li> </ol>
HTML
HTML
<a id="Install NetPBX"></a>

Installing NetPBX

The Aastra BP phone system sends SMDR information via a serial connection. To collect the data from the serial port and send it to TIM Plus, you first need to install the NetPBX software. For setup instructions, click on the link below:

Install and configure NetPBX

HTML
<a id="Configure TIM Plus"></a>

Configuring TIM Plus

Once NetPBX is configured and collecting data, log in to TIM Plus and perform the following steps:

  1. Click on the Directory tab.
  2. Choose the site you want to configure and click Properties.
    Screenshotmacro
    Borderfalse
    URL/download/attachments/4817023/aastra_bp_2.pnghttp://docs.call-logger.com:8090/download/attachments/4817023/aastra_bp_2.png
  3. In the Site Properties window, choose Aastra BP from the PBX model drop-down list.
  4. In the Connection method field, select No connection required from the drop-down list.
  5. Click on the Save button to apply the settings.