Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

These instructions help you configure your Aastra MX-ONE ONE (Aastra 700) phone system to work with TIM Enterprise. Contact your system maintainer if you are not familiar with the configuration of your PBX.

...

HTML
<a id="Configure the SMDR output"></a>

Configuring your SMDR output

The MX-One (Aastra 700) phone system saves the call logging information into a local database, located by default in:

...

Screenshotmacro
Borderfalse
URL/download/attachments/16712035/MX-One+logging+DB.png

Info

To edit the default path, SSH into each MX-One (Aastra 700) and use the

Keywordmacro
Labelmc
command.

...

To configure the directory structure, use the

Keywordmacro
Labelmkdir (key 7)

...

command.

Next, you need to enter the following commands for the primary MX-One / Aastra 700 (the one that will send the data via IP to TIM Enterprise):

...

Code Block
callinfo_output_set  -output 2  -lim 1  -type file  -subtype none  -record call  -utc
callinfo_output_set  -output 3  -lim 1  -type file  -subtype none  -record call  -utc  
callinfo_output_set  -output 4  -lim 1  -type file  -subtype none  -record call  -utc  
callinfo_output_set  -output 5  -lim 1  -type file  -subtype none  -record call  -utc  
callinfo_output_set  -output 6  -lim 1  -type file  -subtype none  -record call  -utc  
callinfo_output_set  -output 7  -lim 1  -type file  -subtype none  -record call  -utc  
callinfo_output_set  -output 8  -lim 1  -type file  -subtype none  -record call  -utc  
callinfo_output_set  -output 9  -lim 1  -type file  -subtype none  -record call  -utc  

To send the data, add the Add the following two commands for the same primary MX-One / Aastra 700, in order to send the data to TIM Plus:

Code Block
callinfo_status_set  -lim 1  -output 0  -state on
callinfo_status_set  -lim 1  -output 1  -state on

...

HTML
<a id="Configure TIM Enterprise"></a>

Configuring TIM Enterprise

Follow the steps below to configure TIM Enterprise to listen for SMDR data from your MX-One (Aastra 700) :

  1. Click on the Directory tab.
  2. Locate the PBX object you want to configure in the Directory, right-click on it and select Properties.
  3. A new window will open, displaying the general properties of your PBX object. Select Avaya IP Office 6+ Aastra MX-ONE from the Data format list and tick the 
    Keywordmacro
    LabelKeep a local backup of data
    box, as shown below:
    Screenshotmacro
    Borderfalse
    URL/download/attachments/17400097/MX-One_2.png
  4. Click on the Connection tab and select Listen for connections from PBX from the Connection method list.
  5. Leave the Host field blank.
  6. In the Port field, enter the port number you have configured in the phone system.
  7. Click on the Save button to apply the settings.
    Screenshotmacro
    Borderfalse
    URL/download/attachments/17400097/MX-One_3.png