Unify (Siemens) OpenScape Business - DSN connection

...

<a id="Configure the SMDR output"></a>

Configuring the SMDR output

Follow the instructions below to configure the SMDR output in your phone system. These instructions are taken from the Unify OpenScape Business manual:

1. Log on to OpenScape Business Assistant and click on

   Buttonmacro
   Label Setup

   ->

   Buttonmacro
   Label Wizards

   ->

   Buttonmacro
   Label Central Telephony

   , as shown below:
   

   Screenshotmacro
   Border false URL /download/attachments/1504053715040530/unify_openscape_business_1.png

2. Click

   Buttonmacro
   Label Edit

   to start the

   Referencemacro
   Label Call Detail Recording

   wizard.
3. In the new window that opens, tick the

   Keywordmacro
   Label Activate Call Charge Recording

   to enable the CDR output, as shown below:
   

   Screenshotmacro
   Border false URL /download/attachments/1504053715040530/unify_openscape_business_2.png

<a id="ConfigureSet theup a DSN connection"></a>

Setting up a DSN connection

The default SMDR output option in the Unify OpenScape Business phone system is

...

<a id="Configure the interface file"></a>

Configuring the interface file

 Follow the steps below to configure the interface file to establish an HTTPS connection with your Unify OpenScape Business:

1. Open the Unify OpenScape Business.TDT file, located by default in C:\Program Files\Tri-Line\TIM Enterprise\config.
2. Edit the file to point to the IP address of your Unify OpenScape Business and enter the relevant username and password, as shown below
   

   Screenshotmacro
   Border false URL /download/attachments/15040530/unify_openscape_business_tdt_1.png

3. Remove the apostrophe (') in front of the amended fields to enable them. An example of a configured interface file is shown below:
   

   Screenshotmacro
   Border false URL /download/attachments/15040530/unify_openscape_business_tdt_2.png

<a id="Configure TIM Enterprise"></a>

Configuring TIM Enterprise

Once the DSN connection has been set up, log in to TIM Enterprise and perform the following steps:

1. Click on the Directory tab.
2. Locate the PBX object you want to configure in the Directory, right-click on it and select Properties.
3. A new window will open displaying the general properties of your PBX object. Select Unify OpenScape Business from the Data format on the right-hand side, as shown below:
   

   Screenshotmacro
   Border false URL /download/attachments/15040582/unify_openscape_business_DSN_2.png

4. Click on the Connection tab and select System DSN connection from the Connection method list.
5. In the DSN field, select Unify OpenScape Business from the drop-down list.
6. In the Frequency field, enter 5 to check for data every five seconds.
7. In the DB script field, select Unify OpenScape Business from the drop-down list.
8. Click on the Save button to apply the settings.
   

   Screenshotmacro
   Border false URL /download/attachments/15040582/unify_openscape_business_DSN_3.png