...
| Pbxsummary | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
| HTML |
|---|
<a id="Configure the CIL output"></a> |
Configuring your CIL output
CIL access over Ethernet
| Info |
|---|
In addition to CIL access over V.24 ports, |
...
all Realitis DX and iSDX systems with |
...
firmware revision 6.0 |
...
| Tip |
|---|
Note: Ethernet port address information is contained in this publication. If the information on how to set-and above can send their CIL information by Ethernet. The System/UPI card - ACI - only allows a maximum of three such connections; subsequent connection requests are rejected. To set up and activate this feature is required, a request must be made via to Product Management at Siemens, Beeston. |
The CIL TCP server on the System/UPI cards allows a maximum of three concurrent connections from remote clientequipment (e.g. CILE). When the three connections are in use, subsequent connection requests are rejected.
Connecting to the CIL server
To gain connection to the CIL server on the System/UPI cards, it is necessary for the remote CILE to open a TCP/IP TIM Plus establishes a TCP connection to the IP address of the active side DX. The connection request must contain the logical port number of the particular service required.The DX System/UPI card of your Siemens phone system.
You can choose the IP address of the System/UPI card TCP/IP address is specified by setting the variable "IPACT" in
| Referencemacro | ||
|---|---|---|
|
The default listening port is
| Referencemacro | ||
|---|---|---|
|
Once a connection is established, the DX will begin sending packets to the connected client.
| HTML |
|---|
|
Configuring TIM Plus
| HTML |
|---|
<a id="Configure TIM Plus"></a> |
Configuring TIM Plus
Follow the steps below to configure TIM Plus to collect SMDR data from your Siemens Realitis/HiPath DX:
- Click on the tab.
- Choose the site you want to configure and click .
Screenshotmacro Border false URL /download/attachments/12583524/siemens_realitis.png - In the Site Properties window, select Siemens HiPath DX from the PBX model drop-down list.
- In the Connection method field, select Actively connect to PBX from the drop-down list.
- In the Host field, enter the IP address of the System/UPI card of your phone system.
- In the Port field, enter 17257.
- Leave the Username and Password fields blank.
- In the Connection script field, select Siemens Realitis DX from the drop-down list.
- Click on the button to apply the settings.