Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Pbxsummary
Supportfiles1Siemens HiPath DX.TDT
Supportfiles2Siemens HiPath DX.TDS
ConnectionSerial connection
RequiredTask1Configure the CIL output
RequiredTask2Install NetPBX
RequiredTask3Configure TIM Plus

HTML
<a id="Configure the CIL output"></a>

Configuring your CIL output

When configuring your Siemens Realitis/

...

Hipath DX to send its CIL information via a serial connection, you need to directly connect a serial cable from the phone system's wall box to the PC running netpbx .

Your system maintainer needs to enable CIL output by setting it to the 

Keywordmacro
LabelFull or unrestricted CIL
format.

HTML
<a id="Install NetPBX"></a>

Installing NetPBX

To collect call logging data from the serial port of your phone system and send it to TIM Plus, you first need to install the NetPBX software. For setup instructions, click on the link below:

Install and configure NetPBX

HTML
<a id="Configure TIM Plus"></a>

Configuring TIM Plus

Once NetPBX is configured and collecting data, log in to TIM Plus and perform the steps below:

  1. Click on the Directory tab.
  2. Choose the site you want to configure and click Properties.
    Screenshotmacro
    Borderfalse
    URL/download/attachments/4817027/siemens_hipath_dx_2.png
  3. In the Site Properties window, select Siemens HiPath DX from the PBX model drop-down list.
  4. In the Connection method field, select No connection required from the drop-down list.
  5. Click on the Save button to save the settings.