...
Field name | Details | ||
---|---|---|---|
CM40 | Default output port and attributes: 9600 baud, 8 data bits, no parity, 2 stop bits, DTR/RTS flow control. | ||
CM13+05 | Enable SMDR for incoming calls to required stations. | ||
CM13+06 | Enable SMDR for outgoing calls to required stations. | ||
CM35+14 | Enable SMDR for outgoing calls to required trunk routes. | ||
CM35+49 | Enable SMDR for incoming calls to required trunk routes. | ||
CM08 | If SMDR for incoming calls is enabled, specify whether the setting applies to all incoming calls or only to those that use account codes. Also, include ANI/Caller ID for incoming calls.
|
HTML |
---|
<a id="Install NetPBX"></a> |
...
To capture SMDR data from your NEC NEAX using a serial connection, you first need to install the NetPBXnetpbx software to collect the data from the serial port and send it to TIM Plus. For setup instructions, click on the link below:
HTML |
---|
<a id="Configure TIM Plus"></a> |
...
- Click on the tab.
- Choose the site you want to configure and click
Screenshotmacro Border false URL /download/attachments/12583276/nec_neax_2.png . - In the Site Properties window, select NEC NEAX from the PBX model drop-down list.
- In the Connection method field, select No connection required from the drop-down list.
- Click on the button to apply the settings.