Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Configuring your SMDR output

The SMDR output on the LG IPLDK is disabled by default has SMDR output disabled. Below you will find the programming number codes and the fields that need to be configured.. To enable the output, you need to amend the following settings in the programming sections below:

Print Serial Port Selection (PGM 175)

Within this window you need In the Print Serial Port Selection (PGM 175) window, set Info/On-line SMDR to Telnet 1. This will allow TIM Plus to connect to the LG IPLDK on TCP port 23 to receive SMDR data.

Below is an example of the Print Serial Port Selection window:

COM1/COM2 to send call logging data to the serial port.

Screenshotmacro
Borderfalse
URLhttp://docs.call-logger.com:8090/download/attachments/4817111/lg_ipldk_1.png

SMDR Attributes (PGM 177)

Below is an example of the SMDR Attributes window:

FieldDescription
Save EnableLeave this as the default, which is unticked
Print EnableThis needs to be enabled by clicking on the check box
SMDR Record Call TypeThis needs to be set to 'All Calls', you will need to select this from the drop-down list
Records In DetailThis needs to be enabled by clicking on the check box
Print Incoming CallThis needs to be enabled
Print Lost CallThis needs to be enabled
SMDR Dial Digit HiddenLeave this as the default which is '0'
SMDR Currency UnitLeave this as the default which is blank
SMDR Cost Per Metering PulseLeave this as the default which is blank
SMDR FractionLeave this as the default which is '0'
SMDR Start TimeLeave this as the default which is '0'
SMDR Hidden DigitLeave this as the default which is 'Right'
Long Distance Call Digit CounterLeave this as the default which is '0'
Long Distance Code (Max 2 Digits)Leave this as the default
MSN Print on SMDRThis needs to be disabled
Print Caller NumberThis needs to be disabled

Screenshotmacro
Borderfalse
URLhttp://docs.call-logger.com:8090/download/attachments/4817111/lg_ipldk_2.png

ISDN Attributes (PGM 200)

Below is an example of the ISDN Attributes window. Please note that the Enable the CLI Print to serial field needs to be enabled., as shown the ISDN Attributes window below:

Screenshotmacro
Borderfalse
URLhttp://docs.call-logger.com:8090/download/attachments/4817111/lg_ipldk_3.png

...

Install and configure NetPBX

HTML
<a id="Configure TIM Plus"></a>

...

Once NetPBX is configured and collecting data, log on in to TIM Plus as usual and apply perform the following settingssteps:

  1. Click on the Directory tab.
  2. Click on the site configured during the setup wizard Choose the sites you want to configure and click Properties.
    Screenshotmacro
    Borderfalse
    URLhttp://docs.call-logger.com:8090/download/attachments/4817111/lg_ipldk_5.png
  3. Within In the Site Properties window, select LG IPLDK from the PBX model drop-down list.
  4. In the Connection method field, select No connection required from the drop-down list.
  5. Click on the Save button to apply the settings.

...