Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Calls can be priced differently when TIM Professional allows you to apply different rates to specific calls, depending on whether they were made over certain trunks, by particular extensions, by using different a particular trunk access codes , and or from different specific sites. This can be achieved by creating a routing table, such as the one shown below.

...

Code Block
[Extension]
 
3000 = Payphone
3001 = Payphone
3002 = Payphone
3003 = Payphone
 
[Trunk]
 
2001 = NTL
2002 = NTL
2003 = NTL
2004 = NTL
2005 = NTL
2006 = NTL
2007 = NTL
 
[Access Code]
 
78 = PrivateWire
 
[Site]
 
Default Site = BT

 

In this the example above, assuming the default tariff table is set to BT, then any call data from the site '

Referencemacro
LabelDefault Site
'
would be reinforced as a BT call.

If, however, a call was made using the trunk access code 78, it this would be costed as a PrivateWire call. This would be overridden if the call was made over any of the trunks 2001 to 2007 . In this case and it would be costed at NTL rates.However, taking precedence above all of this, at 

Referencemacro
LabelNTL
rates. In the same way, if the call was made from any of the extensions 3000 to 3003, it would be priced using the Payphone rate.

 

 

HTML
<p>Open the <span class="keyword">ROUTING.CFG</span> file found in the  <span class="keyword">\config</span> folder within the main program folder.</p>

<p>Calls can be priced differently when made over certain trunks, by particular extensions,
by using different trunk access codes, and from different sites.</p>

<p>This is made possible by use of this routing table.  Some criteria takes precedence over
others  and the hierarchy is as follows:</p>

<ul>
    <li>Extension Routing</li>
    <li>Least-Cost Routing</li>
    <li>Hard Trunk Routing</li>
	<li>Trunk Access Routing</li>
    <li>Site Routing</li>
</ul>

<p>Each set of criteria should be listed in its own section.  Sections are defined by
inserting the section name in square brackets.</p>

<p>A typical routing configuration may look like this:</p>
Code Block
themeEclipse
[Extension]

3000 = Payphone
3001 = Payphone
3002 = Payphone
3003 = Payphone

[Trunk]

2001 = NTL
2002 = NTL
2003 = NTL
2004 = NTL
2005 = NTL
2006 = NTL
2007 = NTL

[Access Code]

78 = PrivateWire

[Site]

Default Site = BT

...

the 

Referencemacro
LabelPayphone
rate, taking precedence above all other conditions.