Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

The Daily Activity report provides a summary showing the volume of all inbound, outbound and missed calls for each day. It is useful for organisations whose call traffic fluctuates throughout the year because, by identifying your busiest periods, it allows you to more effectively plan your staffing requirements.

Screenshotmacro
Borderfalse
URL/download/attachments/4817253/daily_activity_1.png

HTML
<a id="Running the report"></a>

Running the report

On the Reports screen, select the Daily activity report from the left-hand pane and click the Select this report button.

Screenshotmacro
Borderfalse
URL/download/attachments/4817253/daily_activity_2.png

A new window will appear, where you can set the parameters of your report.

Selecting the reporting period

For each report, you must specify a time span that covers the calls you want the report to include. This is known as the "reporting period".

Screenshotmacro
Borderfalse
URL/download/attachments/4817244/period_general.png

There are several preset reporting periods available for selection, based on the standard Gregorian calendar. The following table describes how the start and end times are defined for each preset period:

PeriodDescription
TodayThe start and end dates are set to the current date. The start time is set to 00:00:00 and the end time to 23:59:59.
YesterdayThe start and end dates are set to the current date minus one day. The start time is set to 00:00:00 and the end time to 23:59:59.
This weekThe start date is set to the first day of the current week (normally Monday). The end date is set to the current day. The start time is set to 00:00:00 and the end time to the current time.
Last weekThe start date is set to the date of the last Monday, and the end date is set to the start date plus seven days. The start time is set to 00:00:00 and the end time to 23:59:59.
This monthThe start date is set to the first day of the current month. The end date is set to the current day. The start time is set to 00:00:00 and the end time to the current time.
Last monthThe start date for this period is set in three stages: The day is set to the first day of the month. The month is set to the previous month. The year is set to the current year, unless it is currently January, in which case, the previous year is used. The start and end times are set to 00:00:00 and 23:59:59 respectively.
This yearThe start date is set to the first day of the first month of the current year, whilst the end date is set to today's date. The start and end times are set to 00:00:00 and 23:59:59 respectively.
All callsThe start and end dates and times are set to the dates and times of the first and last call in the entire call database, respectively.

In addition to the presets described above, it is possible to specify a custom reporting period by choosing Custom period from the

Referencemacro
LabelPeriod
 drop-down list and specifying your own  
Referencemacro
LabelStart date
Referencemacro
LabelStart time
Referencemacro
LabelEnd date
 and 
Referencemacro
LabelEnd time
of the period you want to report on.

Screenshotmacro
Borderfalse
URL/download/attachments/4817245/account_summary_3.png

Once you have set the reporting period, click on the Next button to set additional report parameters and options, or select the Finish button to run the report immediately.

Selecting the reporting entity

The Reporting entity parameter allows you to select the part of your organisation whose calls the report should include, e.g. a site, a group or an individual user.

Screenshotmacro
Borderfalse
URL/download/attachments/4817244/entity_general.png

Site

To report on a particular site, select it from the drop-down list or select All sites .

Reporting_filter
FilterSite
ValueAll sites

Group

If a site has been selected, you are able to further limit the report's results by selecting a group from the drop-down list.

Reporting_filter
FilterGroup
ValueAll groups

User

If both a site and group have been selected, you can further limit the report's results to include only calls involving a particular user, by selecting that user from the drop-down list.

Reporting_filter
FilterUser
ValueAll users

Tip

If your web account is restricted to a specific site or group, only those entities to which you have access will be available in the drop-down lists.

Once you have selected the scope of your report, click on the Next button to set additional report parameters and options, or to run the report immediately, click the Finish button.

Selecting the report filters

You can limit the results of your report by choosing one or more of the following filters:

Screenshotmacro
Borderfalse
URL/download/attachments/4817244/filter_general.png

Account code

To produce a report consisting only of calls that were made using a particular account code, enter the account code in the field provided.

Reporting_filter
FilterAccount code
Value0140

To report on more than one account code, separate each code using a comma.

Call type

This filter allows you to define the type of call you want to report on, in terms of where the call originated and where it was delivered, e.g. incoming, outgoing, internal etc.  To report on all types of call, set this to All calls.

Reporting_filter
FilterCall type
ValueAll calls

Carrier

If you use more than one carrier, you can limit the results to include only calls that were made using a specific carrier.

Reporting_filter
FilterCarrier
ValueAll carriers

Info

If you use only one carrier, there will be no drop-down list available and no option to choose a carrier.

CLI

Calling Line Identification (CLI) is the telephone number of the remote caller in an incoming call scenario.

You can report on calls that originate from a specific CLI or those whose CLI matches a particular pattern of digits. For example, to report on all incoming calls from Tri-Line, you could enter 02072652600.

Reporting_filter
FilterCLI
Value02072652600

You can use the ! symbol to explicitly exclude a CLI from the report's results, and/or the

Referencemacro
Label*
 symbol as a wildcard in digit pattern matching.  For example, to exclude calls from Tri-Line, but include all others, you could use !020726526*. To report on more than one CLI, use a comma to separate each entry.

Cost

You can define a cost filter to include calls above or below specific values by entering your criteria, as shown below:

Reporting_filter
FilterCost
Value<2.00

You can specify a cost range by using the 

Referencemacro
Label-
 symbol; to specify limits, use the comparison operators, >, <, and 
Referencemacro
Label!
 .

Destination

If you want to filter calls to a specific, known destination, type the name of the destination in the text box provided. This filter accepts the ! and * symbols for excluding values and specifying partial matches, respectively.

For example, if you wanted to exclude all calls to France, you could enter

Keywordmacro
Label!France*
, as shown below:

Reporting_filter
FilterDestination
Value!France*

Dialled number

To filter calls to a specific dialled number, type it in the text box provided. The dialled number is defined as the number that is dialled (in the case of an outbound call), or the DDI number that the remote party dialled to reach a particular extension or group (in the case of an inbound call).

To filter calls to a specific area, a partial number can be entered (e.g. 0033 for calls to France).

Reporting_filter
FilterDialled number
Value0033

You can use the ! symbol to explicitly exclude a dialled number from the report's results, and/or the 

Referencemacro
Label*
 symbol as a wildcard in digit pattern matching.  For example, to exclude calls to Tri-Line, but include all others, you could use !020726526*). To report on more than one dialled number, use a comma to separate each entry.

Duration

To filter calls above or below a particular duration, enter the desired duration in seconds.

Reporting_filter
FilterDuration
Value>1800

You can specify a duration range by using the 

Referencemacro
Label-
 symbol; to specify limits, use the comparison operators, ><, and 
Referencemacro
Label!
 .

In the above example, the report will return only calls longer than 1800 seconds (30 minutes).

LCR code

To filter your results to include only calls that used a Least Cost Routing (LCR) code, enter it in the text box provided.

Reporting_filter
FilterLCR code
Value162

You can use the ! symbol to explicitly exclude a LCR code from the report's results, and/or the 

Referencemacro
Label*
 symbol as a wildcard in digit pattern matching.  For example, to exclude calls made using all LCR codes beginning
Referencemacro
Label162
, you could enter
Keywordmacro
Label!162*
To report on more than one LCR code, use a comma to separate each entry.

Response

This option allows you to filter calls based on their response time, measured in seconds. Specify the desired response time threshold in the text box provided.

Reporting_filter
FilterResponse time
Value>10

In the above example, the search results will display calls that have a response time greater than 10 seconds. 

You can specify a response time range by using the 

Referencemacro
Label-
 symbol and; to specify limits, use the comparison operators, ><, and 
Referencemacro
Label!
 .

Start time

This option allows you to filter calls based on the time the call started. Specify the start time in the text box provided using the hh:mm:ss format.

For example, to include only calls that began after 10 am, you could enter 10:00:00 in the Start time field, as shown below:

Reporting_filter
FilterStart time
Value10:00:00

Trunk access code

If your telephone system uses trunk access codes to connect calls using specific channels, you can limit your report's results to include only calls made using those codes. Specify the trunk access code in the text box provided.

Reporting_filter
FilterTrunk access code
Value9

You can use the ! symbol to explicitly exclude a trunk access code from the report's results, and/or the 

Referencemacro
Label*
 symbol as a wildcard in digit pattern matching. For example, to exclude calls made using the
Referencemacro
Label9
 trunk access code, you could enter 
Keywordmacro
Label!9
To report on more than one trunk access code, use a comma to separate each entry.

Selecting the report options

This section enables you to further narrow down your report results, by excluding certain types of calls. It also allows you to sort the report's results in a particular manner.

Screenshotmacro
Borderfalse
URL/download/attachments/4817253/daily_activity_options.png

Exclude weekends

To exclude weekend calls from your report's results, select the 

Referencemacro
LabelExclude weekends
 option.

Reporting_option
OptionExclude weekends

Exclude transfers

To exclude transferred calls from your report's results, select the

Referencemacro
LabelExclude transfers
 option.

Reporting_option
OptionExclude transfers

Sort order

Choose from the

Referencemacro
LabelSort order
 drop-down list whether you want the results of the report to appear in ascending or descending order.

Reporting_filter
FilterSort order
ValueAscending
OptionSort order

Sort results by

To sort your report's results by a particular column, select it from the 

Referencemacro
LabelSort results by
 drop-down list.

Reporting_filter
FilterSort results by
ValueDay

Ignore short missed calls

Missed calls below a certain duration can sometimes pollute the meaning of a report's results. To exclude such short calls from your report, enter a duration threshold in the text box provided, e.g. to ignore calls below 3 seconds, enter 

Keywordmacro
Label3
.

Screenshotmacro
Borderfalse
Shadowfalse
URL/download/attachments/4817244/ignore_missed_calls.png

Selecting the report format

This section allows you to choose the media format of your completed report. The formats available are 

Referencemacro
LabelWeb
Referencemacro
LabelPDF
Referencemacro
LabelExcel
Referencemacro
LabelCSV
 and 
Referencemacro
LabelXML
.

More details about each report format are available in the Setting the report format section above.

HTML
<a id="Creating the report"></a>

Creating the report

When you have selected a reporting period and have chosen any filters and options, you can either run the report immediately by clicking on the

Buttonmacro
LabelRun now
 button, or schedule it for future delivery.

Screenshotmacro
Borderfalse
URL/download/attachments/4817244/creating_the_report.png

HTML
<a id="The report's results"></a>

The report's results

Below is an example of this report's output in

Referencemacro
LabelWeb
 format, showing the total volume of all inbound, outbound and missed calls for each day.

Screenshotmacro
Borderfalse
URL/download/attachments/4817253/daily_activity_1.png

As with all reports produced by TIM Plus, each page of the report includes the following information:

  • the report's title
  • the date and time that the report was generated
  • the name of the report, if applicable

The

Referencemacro
LabelWeb
format is the most interactive of all formats: all column headers are click-sortable and most graphical and tabular elements can be drilled down into, allowing deeper analysis of your results. By clicking on the About this report link at the top-right corner of the page, you can review any filters and options that have been applied to the report.

The body of the report consists of a table showing a summary of your incoming and outgoing calls for each day during the period you selected. Each row shows the following information:

HeaderDescription
DayThe day of the week that the data covers

Inbound

  • Squiggle: The total volume of calls received
  • Total duration: The total length of time spent on incoming calls
  • Average duration: The average call duration of inbound calls
  • Average response: The average length of time taken to answer a call
  • Duration Avg: The average length of time a caller waited before abandoning the call (in hours, minutes, seconds)
MissedThe missed calls column is always displayed as red. It allows you to re-order your details based on the total number of missed calls for the date shown.

Outbound

  • Squiggle: The total volume of outbound calls
  • Total duration: The total length of time spent on outbound calls
  • Average duration: The average duration of outbound calls
  • Cost: The total cost of all calls made, irrespective of each call's local currency
To modify your report to cover a larger organisational scope, click on an element of the breadcrumb as shown below:

Screenshotmacro
Borderfalse
Shadowfalse
URL/download/attachments/4817244/breadcrumb.png