...
Step | IOS commands | Description | ||||
---|---|---|---|---|---|---|
1 | enable | Causes the UCME to enter EXEC mode. Type your EXEC password if requested | ||||
2 | conf t | Enters the global configuration mode | ||||
3 | aaa new-model | Enables aaa accounting mode | ||||
aaa accounting connection h323 start-stop group RADIUS | ||||||
gw-accounting aaa | ||||||
acct-template callhistory-detail | ||||||
4 | RADIUS-server host 192.168.0.1 auth-port 0 acct-port 1612 | Specifies the IP address and port of TIM Plus's RADIUS, to which CDR data will be sent, e.g.
| ||||
5 | RADIUS-server key C1sco | Specifies a RADIUS authentication secret that will be used by TIM Plus (configured in the next section), e.g.
| ||||
6 | RADIUS-server vsa send accounting | Enables VSA events | ||||
7 | end | Exits configuration mode | ||||
8 | wr | Saves the changes |
Multi-site configuration
If you need to send the data to more than one server, such as TIM Plus and UCC server for example, you can set up multiple RADIUS connections in the phone system. To configure a multi-site system, follow the steps below:
...