Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

These instructions help you configure your Panasonic KX-TDA/E/NCP500/1000 phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Pbxsummary
Supportfiles1Panasonic KX-TD Series.TDT
Supportfiles2Panasonic KX-TD Series.TDS
ConnectionSerial connection
RequiredTask1Configure the SMDR output
RequiredTask2Install NetPBX
RequiredTask3Configure TIM Plus

HTML
<a id="Configure the SMDR output"></a>

Configuring the SMDR output

Follow the steps below to configure your Panasonic phone system to output SMDR to TIM Plus.

  1. Log in to the Panasonic Maintenance Console program.
  2. Click on the 11. Maintenance tab from the left-hand menu.
  3. Click on the SMDR tab and configure the options as shown below:
    Screenshotmacro
    Borderfalse
    URL/download/attachments/4817094/panasonic_kx_tda_1.png
  4. Click on the SMDR Options tab and configure the options as shown below:
    Screenshotmacro
    Borderfalse
    URL/download/attachments/4817094/panasonic_kx_tda_2.png
  5. Click on the Apply button to save the changes.
HTML
<a id="Install NetPBX"></a>

Installing NetPBX

The Panasonic KX-TDA/E/NCP500/1000 phone systems can send SMDR information via a serial connection. To collect the call logging data from the serial port and send it to TIM Plus, you first need to install the netpbx software. For setup instructions, click on the link below:

Install and configure NetPBX

HTML
<a id="Configure TIM Plus"></a>

Configuring TIM Plus

Once NetPBX is configured and collecting data, log in to TIM Plus and perform the steps below:

  1. Click on the Directory tab.
  2. Choose the site you want to configure and click Properties.
    Screenshotmacro
    Borderfalse
    URL/download/attachments/4817097/panasonic_kx_ta_1.png
  3. In the Site Properties window, select Panasonic KX-TD Series from the PBX model drop-down list.
  4. In the Connection method field, select No connection required from the drop-down list.
  5. Click on the Save button to apply the settings.