These instructions help you configure your Siemens Realitis/HiPath DX phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.
| Pbxsummary |
|---|
| Supportfiles1 | Siemens HiPath DX.TDT |
|---|
| Supportfiles2 | Siemens HiPath DX.TDS |
|---|
| Connection | Active connection |
|---|
| RequiredTask1 | Configure the CIL output |
|---|
| RequiredTask2 | Configure TIM Plus |
|---|
|
| HTML |
|---|
<a id="Configure the CIL output"></a> |
Configuring your CIL output
CIL access over Ethernet
| Info |
|---|
In addition to CIL access over V.24 ports, all Realitis DX and iSDX systems with firmware revision 6.0 and above can send their CIL information by Ethernet. The System/UPI card - ACI - only allows a maximum of three such connections; subsequent connection requests are rejected. To set up and activate this feature, a request must be made to Product Management at Siemens, Beeston. |
Connecting to the CIL server
TIM Plus establishes a TCP connection to the IP address of the System/UPI card of your Siemens phone system.
You can choose the IP address of the System/UPI card by setting the variable
in the permanent database. Your local maintenance engineer should be able to program this address for you.
The default listening port is
.
| HTML |
|---|
<a id="Configure TIM Plus"></a> |
Configuring TIM Plus
Follow the steps below to configure TIM Plus to collect SMDR data from your Siemens Realitis/HiPath DX:
- Click on the Directory tab.
- Choose the site you want to configure and click Properties.
| Screenshotmacro |
|---|
| Border | false |
|---|
| URL | /download/attachments/12583524/siemens_realitis.png |
|---|
|
- In the Site Properties window, select Siemens HiPath DX from the PBX model drop-down list.
- In the Connection method field, select Actively connect to PBX from the drop-down list.
- In the Host field, enter the IP address of the System/UPI card of your phone system.
- In the Port field, enter 17257.
- Leave the Username and Password fields blank.
- In the Connection script field, select Siemens Realitis DX from the drop-down list.
- Click on the Save button to apply the settings.