These instructions help you configure your Siemens Realitis/HiPath DX phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.
| Pbxsummary |
|---|
| Supportfiles1 | Siemens HiPath DX.TDT |
|---|
| Supportfiles2 | Siemens HiPath DX.TDS |
|---|
| Connection | Serial connection |
|---|
| RequiredTask1 | Configure the CIL output |
|---|
| RequiredTask2 | Install NetPBX |
|---|
| RequiredTask3 | Configure TIM Plus |
|---|
|
| HTML |
|---|
<a id="Configure the CIL output"></a> |
Configuring your CIL output
When configuring your Siemens Realitis/Hipath DX to send its CIL information via a serial connection, you need to directly connect a serial cable from the phone system's wall box to the PC running netpbx .
Your system maintainer needs to enable CIL output by setting it to the
| Keywordmacro |
|---|
| Label | Full or unrestricted CIL |
|---|
|
format.
| HTML |
|---|
<a id="Install NetPBX"></a> |
Installing NetPBX
To collect call logging data from the serial port of your phone system and send it to TIM Plus, you first need to install the NetPBX software. For setup instructions, click on the link below:
Install and configure NetPBX
| HTML |
|---|
<a id="Configure TIM Plus"></a> |
Configuring TIM Plus
Once NetPBX is configured and collecting data, log in to TIM Plus and perform the steps below:
- Click on the Directory tab.
- Choose the site you want to configure and click Properties.
| Screenshotmacro |
|---|
| Border | false |
|---|
| URL | /download/attachments/4817027/siemens_hipath_dx_2.png |
|---|
|
- In the Site Properties window, select Siemens HiPath DX from the PBX model drop-down list.
- In the Connection method field, select No connection required from the drop-down list.
- Click on the Save button to save the settings.